Like the man himself, the new Slash Wah from Dunlop is both revolutionary and classic, right down to its hot rod metallic red finish and cutting edge circuit design. Now you can have all the features and screaming tone of Slash's very own custom wah pedal; a tool as essential to the hard rock icon's style as his Les Paul and Marshall amp. The Slash Wah deploys a searing high gain distortion coupled with the Fasel-loaded Classic circuit for instant lead tone that not only cuts through, but sings with a sweet and lush top end. Convenient LEDs indicate distortion on/off and wah on/off modes, so there's no more guessing game every time you put your foot down. And with the batteries readily accessible from the top of the rocker pedal, you don't have to fumble with a screwdriver when its time to re-power. So get your boot on a Dunlop Slash Wah. Top hat not included.

Features

Power

The SW95 Slash Cry Baby Wah Wah is powered by two 9-volt batteries (accessed via the top of the pedal), an AC adapter such as the Dunlop ECB004/ECB004E,or a DC Brick power supply.

Controls

• Volume knob controls overall effect volume
• Gain knob controls overall amount of distortion
• Distortion switch toggles distortion effect on/off (red LED indicates on)
• Footswitch toggles pedal on/off (blue LED indicates on)

Setup Instructions

• Run an instrument cable from your guitar to the SW95’s INSTRUMENT jack and another instrument cable from the SW95’s AMPLIFIER jack
• into your amplifier’s input.
• Set VOLUME and GAIN controls to their 12 o’clock positions.
• Push the toe of the pedal down until you feel a “click” to turn the pedal on/off.
• Rotate the VOLUME control clockwise to increase volume or counterclockwise to decrease it.
• To engage the SW95’s distortion circuit, push in the red DISTORTION switch.
• Rock your foot back and forth on the pedal to hear the vocal, expressive tonesthat the Cry Baby is famous for.
• Rotate the GAIN control clockwise to increase amount of distortion or counter clockwise to decrease it.

Specifications

• Impedance
• Input : 1MO
• Output : 4.7kO

Nominal Input :  -8 dBV

• Max Output : +7 dBV
• Noise Floor* : < -94 dBV

Center Freq. (fc)

• Heel Down : 270 Hz to 370 Hz
• Toe Down : 1.5 kHz to 1.9 kHz

Max Gain at fc : 20 dB

• Bypass : True Hardwire
• Current : Draw 18 mA
• Power Supply : 18 volts DC