OKKO TwinSonic MKII 2023 - White

HIGHLIGHTS

• Dual stacking overdrive pre amp
• Tones from sparkly clean, edge of breakup into heavy vintage distortion or fuzz territory
• Incredibly dynamic
• Cleans up well with guitar volume
• Newly designed red channel
• Internal charge pump for higher headroom and increased dynamics
• All metal enclosure
• Hand built, wired and soldered
• White enclosure with red and blue graphics
• LED power indicator on and off for both sides
• Space saving top mounted jack sockets
• Limited lifetime warranty

DESCRIPTION

The OKKO FX TwinSonic MKII brings back the classic OKKO FX TwinSonic and takes it to another level. The OKKO FX TwinSonic MKII is two overdrive circuits, which can be used independently or stacked together.  Stacking both opens up plenty of possibilities that go all the way from edge of breakup into heavy vintage distortion or fuzz territory.

The blue channel is the original OKKO FX TwinSonic circuit, a discrete overdrive with a bold, open, grainy sound like a cranked vintage amp.  It is incredibly dynamic and cleans up perfectly with the guitar volume control.

The newly designed red channel is a transparent overdrive with a slightly smoother gain structure, designed to perfectly stack with the blue side or to add some dirt and harmonics to your base sound on its own. The gain range goes from sparkly clean to dynamic singing mid gain overdrive.

Both channels have the same set of controls.

Gain and Level need no explanation, VOICE changes the overall EQ character of each channel from a wide and full sound on the left to a tighter, punchier sound with pronounced mids on the right.  HI-CUT adjusts treble/presence.  The MODE toggle changes the amount of bass frequencies for each side.  These effective, but intuitive controls allow to dial in the perfect sound for pretty much every guitar/amp combination.

The OKKO FX TwinSonic MKII runs on 18 volts (internal charge pump circuit, no need for a special power supply) for higher headroom and increased dynamics. The OKKO FX TwinSonic MKII can be used in front of an amp or as a preamp into a power amp or amp sim.

CONTROLS

• GAIN: Adjust the level of overdrive, clipping and saturation
• LEVEL: Controls the output signal
• VOICE: Changes the overall EQ character of each channel from a wide and full sound on the left to a tighter, punchier sound with pronounced mids on the right
• HI-CUT: Adjusts treble/presence
• MODE toggle: Changes the amount of bass frequencies for each side

COMPONENT LISTING AND TECH SPEC

• High quality components throughout 
• 9V centre negative power 
• Current consumption* 
• 16 mA bypass 
• 17 mA maximum engaged 
• Battery: Yes

*Current consumption checked with a Truetone mA meter reader

ENCLOSURE DIMENSIONS

• Depth: 117 mm / 4.6 in
• Width: 92 mm / 3.6 in
• Height: 39 mm / 1.5 in

WEIGHT

• 418 g

FX Pedal Planet Limited and FX Pedal Planet Online Store are proud to be UK dealers for OKKO FX.  If we do not have the OKKO FX effects pedal required, please message us via the contacts page and we will do our best to get the product in that you want at the very best price and service.

What planet are you on - FX Pedal Planet