Fill any venue when you plug into this powerful bass amp head. It's loaded with ten tubes, plus the helpful and revolutionary Fender Automatic Bias system.

Watch Out -- Here Comes 300 Watts of All-Tube Bass Tone
No arena will be too big for the amount of power your Fender Super Bassman tube bass amplifier head has offer. Stocked with two channels of all-tube pristine tone; two 1/4" inputs; two 1/4" parallel internal/external speaker jacks; an XLR line out with ground lift, level control, and pre/post EQ switch; a long panel with tons of controls and a few push/pull features; and Fender's cool black textured vinyl covering and silver grille cloth, this amp head comes looking sharp and ready to tear up the scene in style and sound. You'll never be short on power or drive with the fuel this baby brings to your game.

Vintage and Overdrive Channels
The Vintage channel on your Super Bassman projects that classic passive tone stack sound heard in Fender's Twin and Deluxe Reverb amps as well as the TB 1200 and 600 heads. A clear and warm sound with a nice color is the resulting character of this all-tube channel. Your distortion channel has an active tone stack that's more modern with a lot of drive and punch.

Long Line of Controls with Push/Pull EQ and Volume Knobs
The Super Bassman head's Vintage channel features volume, bass, mid, and treble controls. For your overdrive channel, you have gain, blend, volume, bass, mid frequency, mid level, treble, and master controls. For both channels, your bass and treble controls have a push/pull switch to activate deep and bright settings. Your master volume control's push/pull switch mutes your signal.

Classic Fender Looks
No Fender amp head would be complete in bringing pristine tone without some sleek vintage visuals. Your Super Bassman bass amp head is dressed in classic textured vinyl covering and a silver grille cloth with Fender's name on the left side. The black painted metal panel with all of your controls offers that instantly recognizable sliver/black contrast that pairs well with any number of Fender's cabinets.

Versatile Input and Output Features
On the left side of the front panel, you have two adjacent 1/4" input jacks. The second input takes your signal at a -6 dB level. This baby also has two 1/4" parallel internal/external speaker jacks and an XLR direct out with ground lift, level control, and a pre/post EQ switch.

Features:
- 300 watts at 8, 4 or 2 ohms
- Two channels of all-tube tone -- vintage and overdrive
- Vintage channel controls include volume, bass (pull deep), mid, treble (pull bright) controls
- Overdrive channel controls include gain, blend, volume, bass (pull deep), mid frequency, mid level, treble (pull bright), and master (pull mute) controls
- Cool black textured vinyl covering with silver grille cloth
- Two 1/4" inputs; second input at -6 dB
- One XLR line out with ground lift, level control, and pre/post EQ switch
- Effects loop
- Two 1/4" parallel internal and external speaker jacks
- Two 12AX7, one 12AX7 and one 12AT7 preamp tubes
- Six 6550 power tubes
- Footswitch included

Electronics
- Controls: Vintage - VOL, BASS (pull DEEP), MID, TREBLE (pull BRIGHT); Overdrive - GAIN, BLEND, VOL, BASS (pull DEEP), MID FREQ, MID LVL, TREBLE (pull BRIGHT); MASTER (pull MUTE)

Weight And Dimensions
- Amplifier Length: 13.5" (34.3 cm)
- Amplifier Width: 24.5" (62.2 cm)
- Amplifier Height: 10" (25.4 cm)
- Amplifier Weight: 65 lbs. (29.48 kg)

Power Rating
- Output Power: 300 Watts
- Power Handling: 300 Watts @ 8, 4 or 2 Ohms

Controls And Connections
- Channels: Two - (Vintage, Overdrive)
- Inputs: Two - (1/4", Input 2 is at -6dB)
- Effects Loop: 1/4" - (Preamp Out, Power Amp In)
- Line Out: One - (XLR with Ground Lift, Level Control, and Pre/Post EQ Switch)
- Speaker Jack: Two 1/4" Parallel (Internal and External)

Hardware
- Amplifier Covering: Black Textured Vinyl Covering with Silver Grille Cloth
- Cabinet Material: 7-Ply 5/8" Meranti Plywood
- Control Panel: Painted Metal
- Handle: Two Side-Mounted Spring-Loaded Steel Flip Style
- Knobs: Vintage-Style Skirted Black Plastic
- Amplifier Jewel: Red LED Jewel

Tubes
- Pre Amp Tubes: 2x12AX7; 1x12AX7 + 1x12AT7 (Power Amp)
- Power Tubes: 6 X 6550
- Rectifier: Solid State

Accessories
- FootSwitch: 1-Button Footswitch Included

Miscellaneous
- Other Features: Speaker Output 'Mute' for silent recording and Fender Automatic Bias for output tube monitoring/adjustment

Weight, Dimensions, and Manufacturer Part Numbers
Shipping Weight: 75 lbs
Shipping Dimensions: 31 x 20 x 17 in
Manufacturer Part Number (MPN): 2249000000

zZounds is an authorized dealer of Fender products.