Very good condition. No issues. Comes with Device, Power Cord, USB Cable, Case

DANTE READY

The MT 48 is an audio interface without compromise. With its huge dynamic range, superior converters, preamps and headphone amplifiers, it sets new standards in sound quality. Internal DSP power allows for monitor mixes with sophisticated EQ and dynamics processing – all intuitively controlled via touchscreen.

The Perfect Link

The MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH-Line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear.

Swiss Precision Inside

The MT 48 was developed in close cooperation with the Swiss manufacturer Merging Technologies, whose high-precision AD converters offer a staggering dynamic range of 136 dB. This gives the MT 48 four times the resolution of comparable audio interfaces.

The MT 48 comes fully equipped for the reference-class personal studio: two extremely low-noise mic/line preamps with up to 78 dB gain, two line/instrument inputs, four monitor/line outputs and two superb headphone outputs, each with state-of-the-art AD/DA converters. The MT 48’s connectivity may be expanded via ADAT / S/PDIF and AES67; a MIDI interface is also integrated. Four separate monitor mixes can be controlled directly on the unit via touchscreen. On-board processing includes a fully parametric 4-band EQ and a 3-way dynamics processor (gate/compressor/limiter) per channel as well as a high-quality reverb. So musicians get inspiring sound for top performances. And there is still plenty of DSP power for future developments.

New : The MT 48 Becomes Dante Ready

While the MT 48 has always supported the open standard RAVENNA/AES67 for networked audio, some users requested compatibility with the Dante protocol, developed and overseen by Audinate. Due to its ease of use and high compatibility, Dante is widely used in the live and installation sector.

Starting in Q4/2024, the MT 48 will ship Dante Ready (indicated by a sticker on the packaging). Ex factory, the MT 48 continues to be delivered with the RAVENNA/AES67 firmware preinstalled. For Dante operation, Neumann provides an alternative Dante firmware free of charge. In addition, an 8x8 or 64x64 I/O Dante channel license is required, which must be purchased from Audinate. This ensures there are no additional costs for users who do not require Dante.

Features

• Class-leading AD/DA converters with enormous dynamic range
• Intuitive touchscreen user interface
• DSP processing (EQ, dynamics, reverb)
• 4 independent mixers with integrated talkback
• USB, ADAT and AES67 connectivity
• lass-leading AD-converter resolution with a dynamic range of 136 dB
• 2 premium-quality mic/line preamps, 2 pristine line/instrument inputs
• 4 line/monitor outputs
• 2 ultra-low impedance headphone outputs with adjustable crossfeed
• ADAT / S/PDIF optical I/O, MIDI/GPIO, RAVENNA/AES67, Dante Ready
• Two driver outputs per input channel for pre-FX and/or post-FX recording
• Intuitive touchscreen user interface

Mic Inputs 1 -2

• Dynamic Range : 136 dB-A
• Equivalent Input Noise (150 Ohm) : -128 dBu-A
• Input Impedance : 10 kΩ
• Gain Range : 12…+78 dB in 0.5 dB steps or 0.1 dB (fine)
• Pad : 12 dB/24 dB
• Input Level : 0 /+12/+24 dBu (without Pad/with Pad)
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS : < -110 dB (0.0003%)

Line Inputs 1-2

• Dynamic Range : 138.5 dB-A
• Input Impedance : 10 kΩ
• Gain Range : 0…+66 dB
• Sensitivity : +24 dBu…-42 dBu
• Input Level : +24 dBu
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS : < -105 dB (0.0006%)

Instrument/Line Inputs  3 - 4

• Dynamic Range : 135 dB-A
• Input Impedance : 2 MΩ (balanced) / 1 MΩ (unbalanced)
• Gain Range : 0…+66 dB
• Sensitivity : +18 dBu … -48 dBu
• Input Level :+18 dBu
• THD + N Preamp + ADC @ 1 kHz, 0 dBFS : < -112 dB (0.0003%)

Line/Monitor Outputs

• Output Impedance : < 70 Ω
• THD+N@ 1 kHz, 0 dBFS : < -110 dB (0.0003%)
• Dynamic Range : 123 dB-A
• Output Level : +24 dBu

Headphone Outputs

• Output Impedance : 0.035 Ω
• Dynamic Range : 122 dB-A (high) / 117 dB (low)
• Output Level : +16 dBu (high) /+8 dBu (low)
• AES67/Ravenna : Standard RJ-45 Gigabit-Ethernet-Anschluss
• Expansion Connectivity : "ADAT/S/PDIF optical I/O, MIDI I/O via 1/4” jack, (DIN5 adapter set available from Neumann : Cat. No.700261)"
• Computer Interface : USB-C, 2.0 High Speed (480 MB/s) or higher
• Power Consumption : <25 W
• Product Dimensions : 200 x 128 x 40mm