Store demo unit with minor cosmetic marks.

The Austrian Audio CC8 is a small-diaphragm true condenser built in Vienna around the OCC7 capsule. That capsule updates classic CK1-style small-diaphragm behavior for modern levels: linear response, smooth highs that stay open without harsh spikes, and enough SPL handling for cymbals, brass, and loud ensembles.

Transformerless Design and Matching

A transformerless output keeps the path clean and fast. Before leaving the factory, each microphone is measured to within ±0.5 dB sensitivity at 1 kHz, so any CC8 can be match-paired with any other regardless of production date. Switchable -10/-20 dB pads and 60/120 Hz high-pass filters adapt the mic to close percussion or distant acoustic sources.

Typical Uses

Reach for the CC8 on drum overheads and hi-hat, acoustic guitar, piano, strings, woodwinds, brass, and choir or chamber ensembles where you want accurate imaging and controlled off-axis behavior.

This Stereo Set includes two CC8s with an SB1 stereo bar, clips, windscreens, and a transport case so you can set up spaced, XY, or ORTF-style pairs without hunting for matching serial numbers.

Specifications

• Type: Small-diaphragm true condenser
• Capsule: OCC7
• Polar pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 15 mV/Pa
• Equivalent noise: 16 dB SPL (A)
• Max SPL: 146 dB (156 dB with pad)
• Pads: -10 dB, -20 dB
• Low-cut filters: 60 Hz, 120 Hz (2nd order)
• Impedance: 275 Ω (balanced)
• Power: 48 V phantom (< 3 mA)
• Connector: XLR 3-pin
• Dimensions: 140 x 23 x 23 mm (5.5" x 0.9" x 0.9")
• Weight: 140 g (4.9 oz / 0.31 lb)

In the Box

• 2 x CC8 microphones
• 2 x OCH8 mic clips
• 2 x CCW8 windscreens
• SB1 stereo bar
• Transport case