Yamaha DM3S 22-Channel Ultra-Compact Digital Mixing Console DXR12mkIII Powered Speaker Bundle with 2x DXR12 mk3 12-Inch 2000W 2-Way Loudspeakers

Yamaha DM3S DXR12 mk3 Bundle: A Complete 2000-Watt Digital PA From Console to Cabinet

This bundle is the full signal chain for live sound in one purchase: the Yamaha DM3S 22-channel digital mixing console feeding a pair of brand-new DXR12 mk3 12-inch powered loudspeakers. The DM3S is the brain — 16 mic preamps, a 9-inch multi-touch screen, motorized faders, and an 18-in/18-out USB interface in a console small enough to fit in a backpack. The two DXR12 mk3 cabinets are the muscle, each driving a 2000-watt Class-D amplifier to 134 dB of peak SPL. Buy the mixer alone and you still have nothing to hear it through; buy speakers alone and you have nothing to mix on. Together they are a band's front-of-house rig, a mobile DJ's wedding system, and a church's Sunday PA — wired, voiced, and ready out of the box.

The DM3S Puts 22 Channels and 16 Mic Preamps in a Backpack-Sized Console

The DM3S anchors the system with 22 mixing channels — 16 mono mic/line inputs, a stereo input, and 2 FX returns — and 16 mic preamps rated at a remarkably clean -126 dBu equivalent input noise, so condensers and broadcast dynamics alike come in quiet. The 9-inch multi-touch screen runs the whole surface, with Yamaha's GainFinder showing you the right input level at a glance. Nine motorized 100mm faders recall scenes physically, the Touch and Turn encoder edits any parameter on screen, and 1-knob COMP and 1-knob EQ deliver per-channel dynamics and tone shaping without burying you in menus. It is a full-size mixing experience compressed into a 12.6-inch-wide footprint.

Two DXR12 mk3 Mains Bring 134 dB SPL and Yamaha's Newest Speaker Tech

Each DXR12 mk3 pairs a 12-inch woofer and a 1.75-inch compression driver with a newly developed 2000-watt Class-D amplifier — 1700 watts to the low driver, 300 to the high — for 134 dB of peak output per cabinet. FIR-X Tuning aligns the drivers in time at a 1.8 kHz linear-phase crossover for distortion-free, phase-coherent sound, and Drive Motion Calibration corrects woofer cone movement in real time for tighter, more linear bass. This is the mk3 generation: a major step up in headroom and clarity over older 1100-watt cabinets, and more than enough to carry vocals, backing tracks, and a full band across a mid-size room.

FOH or Floor Wedge, the Speakers Set Themselves Up

Both cabinets carry five NEXO-developed DSP modes — FOH/MAIN, MONITOR, DJ, Live Music, and Speech — and an AUTO V/H Position accelerometer that senses whether a speaker is standing upright on a pole or tilted back on its 52-degree monitor angle and selects the right voicing automatically. Stand them on poles either side of the stage and they are your mains; lay one on its side at the lip of the stage and it is an instant floor monitor with the low-end buildup tamed. An intelligent feedback suppressor runs in DYNAMIC mode for handheld mics and FIXED mode for lecterns, so the squeal is handled before it starts.

One Phone Tunes the Whole Rig: USB Recording, Bluetooth, and D-Remote

The system connects cleanly: balanced XLR runs carry the DM3S master output to each DXR12 mk3 combo input, and the speakers' XLR THRU jacks let you daisy-chain a subwoofer later. The console's 18-in/18-out USB interface records the full multitrack of the gig or feeds a livestream into OBS over a single cable, while the speakers stream walk-in music over Bluetooth 5.0. The free D-Remote app tunes both cabinets' level, EQ, delay, and crossover from your phone — useful for dialing the room from the floor — and StageMix gives you wireless control of the DM3S from a tablet. For the band buying its first real PA, the mobile DJ upgrading from underpowered tops, and the venue replacing aging gear, this is the rig that does it all from one purchase.