This is a Gibson ES-135 Vintage Sunburst 1991

While adopting the same 16-inch body size and shape as the Gibson ES-175, the ES-135 features a semi-acoustic construction with a center block, a slightly thinner body, and a Florentine cutaway. Originally introduced in 1956 as a renamed ES-130, production ended after only two years. However, a significantly redesigned reissue was produced in 1991.

This particular guitar is an ES-135 VS, manufactured in 1991, the first year of that reissue. It weighs 3.69kg and is finished in Vintage Sunburst.

It features a maple body, a three-piece maple neck, and a rosewood fingerboard, all laminated like the ES-175. The archtop body with F-holes and the sunburst finish give it a traditional look. It features an adjustable bridge directly mounted to the top, combined with a trapeze tailpiece. Simple dot inlays and a 14° headstock angle are also distinctive features (normally 17°).

The pickups are what appear to be original "P-100s," stacked humbucking pickups developed to reduce noise while maintaining the same size as "P-90s." The tuners are a Kluson vintage-type, while the center block is made of balsa wood called Chromite. The semi-hollow construction and thin body provide resistance to feedback, making it a user-friendly semi-acoustic guitar even with drive from an amp. When actually played, it doesn't sound like a typical humbucker; it's more like a less noisy version of a P90.

It has a rich, resonant sound, a solid feel characteristic of semi-acoustics, and prioritizes ease of use—a perfect balance of features. Owning this guitar gives off a sophisticated vibe. Considering it's 35 years old, it's in remarkably good condition. Highly recommended.

--------------------------------------------------------------------------------
[Accessories] Gibson hard case

[Appearance/Condition] There is some tarnishing, scratches, and wear on the parts. Some parts may have been replaced.

[Truss rod] Plenty of adjustment remaining

[Frets] Approximately 70% remaining (no particular problem with playing)

[Neck] Straight

[Nut width] Approximately 42mm
--------------------------------------------------------------------------------

**ATTENTION**

All customs duties, fees and import procedures are the responsibility of the buyer. Please be aware of the import duties & requirements in your country before you make your purchase.

Should an item be returned due buyer’s failure to pay taxes, customs fees, etc. the cost of the return shipping charges will be subtracted from the refund amount.

Used items can be returned within 7 days of delivery. The cost of a return shipment, which must be trackable and insured, shall be borne by the buyer.

When packing an instrument for shipment we take every precaution to prevent damage during transit.

We always try to accurately convey the condition of our products, however please bear in mind that feel, performance and even condition are subjective. In light of this, please examine the photos carefully!

When examining a truss rod on a straight neck, we check that it can turn up to about 45 degrees in both directions. When we say the truss rod can be adjusted, we mean it can be adjusted up to 45 degrees. Anything beyond that risks damaging the instrument.

Please note that the product description was made at the time of listing and there may be a slight variance when you receive your instrument due to environmental factors such as temperature and humidity.

Regarding accessories, only those shown in the photo or listed as "Accessories" in the description are available.

This item is also on offer locally and might sell elsewhere.

If you have any questions or concerns please feel free to contact us. We are based in Japan so there may be a delay in our response. We are not ignoring you! Thank you for your patience.

Unauthorized reproduction of images and text is strictly prohibited.