HK Audio ELEMENTS EA 600 Poweramp - Multi Channel Power Amp

• System power amplifier with 600 watts Class D power
• Connection of max. four mid/high units or max. two subwoofers or one subwoofer with max. two tops
• 4 system filters (selectable depending on the number of mid/high units connected in a line)
• Active protection circuit, filtering, XLR In/Out
• E-Connect signal connection
• Very low weight of only 2.75 kg
• Color: White

The HK Audio Elements EA 600 is a system power amplifier with a 600 watt Class D power amplifier. It has the same housing design as the E 435 mid/high unit and an output power of 600 watts into 4 ohms. With this system power amplifier, you can supply up to two E 110 Sub subwoofers or a passive subwoofer with a maximum of two E 435 mid/high units or a column with a maximum of four mid/high units.

The amplifier module is ventilated via the front using a temperature-controlled fan. Depending on the number of E 435s connected, a selector switch can be used to select a special equalization that optimizes the frequency response for the respective line length.

• Continuous power per channel @ 4 ohms: 600 watts Class D@ 4 ohms (EIA)
• Active protection circuits: RMS limiter
• Input sensitivity +4 dBu/ -10 dBu (switchable)
• Protection: DC, impedance, thermal
• Cooling: Fan, temperature-controlled
• Connections: Combi jack In, XLR Out, 1x Speakon Parallel Out, 1x E-Connect out
• Dimensions (W x H x D): 11 x 38* x 12 cm 4-7/16 x 15*, x 4-3/4" (excluding E-Connect connector)
  
• Weight: 2.75 kg / 6.1 lbs
• Filter type: Subsonic filter, 4-way system filter, depending on the number of mid-high units connected