The MULTIAMP is a powerful STEREO 150+150W@8ohm, 250W+250W@4ohm or 500W@8ohm (in bridge mode) power amp, that makes its amps and effects sound great at any volume!

It’s an all-in-one combining preamp/effects processor/power amp.

It features most of what a guitar player needs :

A creative and highly intuitive stereo power amplifier and tuner, featuring three fully programmable amp channels (clean/crunch/lead), plus a wide range of effects, virtual amps, speaker cabinets, and microphones that you can configure to your liking. It can be connected to either 1 (or 2) speakers, another amp, or directly to a PA system via an XLR connector.

A user-friendly interface allows to store all your favourite presets for stage and/or studio. Presets also monitored via DV MARK MultiAmp Midi Pedal Board or alternative Midi Controller via Midi Through in-slot in the rear panel.

The MultiAmp features 8 memory banks, each one with 128 prestes subdivided in 3 factory presets and 5 Users banks where you can memorize, copy or modify every Factory preset. No more pedals needed!

SD Card FAT 32 format, max 8Gb included with a large list of various usable presets included. All these can be changed and filed as per your use and/or managed via USB laptop connection and  interface (filed within the included SD Card ).

Input: 1 jack mono
Outputs: 2 jack mono (left/mono,right) / 2 XLR male (left/mono,right)
Channels: three (clean, crunch, lead)
Controls: gain - presence - level - master
EQ Controls: bass - mid - high
Power Amp (solid state): 150+150W@8ohm / 250W+250W@4ohm / 500W@8ohm (in bridge mode)
MIDI connections: in - through
Other features: virtual amps, speaker cabs and microphones, effects, external memory (SD card*)
Dimensions: 2U standard rack - depth 12.76”/324 mm
Weight: 9.48 lbs / 4.3 kg
NOTE: DV Mark amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.