YAMAHA CR-820 STEREO RECEIVER FULLY SERVICED RECAPPED + LED'S

YOU ARE BIDDING ON A YAMAHA CR-820 STEREO RECEIVER FULLY SERVICED RECAPPED + LED'S
EXCELLENT COSMETIC CONDITION 
LIGHTS UP NICELY
EXCELLENT WORKING CONDITION
FULLY RE-CAPPED All electrolytic capacitors have been replaced with Elna and Nichicon Gold capacitors, DC offset and Bias have been adjusted to factory specs and all solder joints re-soldered, unit serviced to new condition

SHIPPING TO USA AND CANADA $65
INTERNATIONAL BUYERS MUST EMAIL FOR SHIPPING COST

Description

Accurately matched performance specifications, functions and controls give overall performance which fully measures up to Yamaha's high tuner, pre and power amplifier standards.

The CR-820 offers an extremely wide range of output powers for which both noise and distortion are below the rated value, for wide dynamic range in actual use.

Both signal strength and centre-zero meters are provided, with the signal strength meter doubling as a signal quality meter on FM.

Specifications

• Tuning range: FM, MWPower output: 50 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.02%Input sensitivity: 2mV (MM), 120mV (line)Signal to noise ratio: 78dB (MM), 97dB (line)Output: 120mV (line)Speaker load impedance: 4Ω (minimum)Semiconductors: 74 x transistors, 4 x IC, 1 x FET, 30 x diodes, 5 x zener diodes, 5 x LED, 4 x ceramic filtersDimensions: 508 x 167 x 395mmWeight: 13.1kg