The Audio-Technica AT-LP60XBT is a fully automatic belt-drive turntable that plays 33-1/3 and 45 RPM records and outputs analog RCA or Bluetooth 5.0 audio (SBC and aptX). This finish is red and black.

Setup

The Dual Magnet cartridge is integrated into the headshell; replace the stylus with ATN3600LC or the ATN3600LE elliptical. A switchable built-in preamp feeds PHONO or LINE on the included 3.5 mm to dual-RCA cable. Start and stop are automatic.

Specifications

• Drive: Belt drive, fully automatic
• Motor: DC servo-controlled
• Speeds: 33-1/3 and 45 RPM
• Platter: Aluminum
• Wow and flutter: <0.25% (WTD) @ 3 kHz
• Signal-to-noise: >50 dB (DIN-B)
• Cartridge: Integral Dual Magnet cartridge with replaceable diamond stylus
• Replacement stylus: ATN3600LC (conical); ATN3600LE elliptical available separately
• Phono output: 2.5 mV nominal at 1 kHz, 5 cm/sec
• Line output: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono preamp gain: 36 dB nominal, RIAA equalized (switchable PHONO/LINE)
• Power: 100 to 240 V, 50/60 Hz, 0.6 A max; external AC adapter 12 V, 2 A
• Dimensions (W x H x D): 359.5 x 97.5 x 373.3 mm (14.15" x 3.84" x 14.70")
• Weight: 2.6 kg (5.73 lb)
• Bluetooth: Version 5.0, A2DP profile, line of sight approx. 10 m (33')
• Bluetooth codecs: SBC, Qualcomm aptX

In the Box

• Dust cover
• Felt mat
• Platter with drive belt
• 45 RPM adapter
• RCA audio cable, approx. 1.2 m (3.9'), 3.5 mm to dual RCA
• AC adapter, approx. 1.5 m (4.9')