Hey there boys and girls !

I am selling this beauty, which has been a staple of my bedroom pedalboard since 1/2026.

It it MINTY ! It is GORGEOUS ! It is the KING! And has a ton of tweakabiity. In fact I’ve concerned not selling it but I’ve bought the altitude, mid air and most recently Nordvang´s Gravity dual od. So my effects chain is quite stacked and this loved one probably will find its use in a more busier situation.

Never left my house, so … it is as good as new.

Feel free to write !

Circuit A (left)

- Replica of the TS10 audio circuit (Non buffered bypass). 

- RC4558 Operational Amplifier

- Internal dip switch for diode clipping settings.    * 2-diode symmetrical for the classic tubescreamer feel.    * 4-diode symmetrical for more headroom and less compression.
- Original Toshiba 1s1588 silicon diodes as in the original TS10 JP 

Circuit B (Middle)
- Replica of the K-circuit.     *High quality buffer.
-  NOS germanium diodes - Russian D9B. 

External ORDER switch to select in which order the signal passes through circuit A & B.

Circuit C (Right)    - Replica of the circuit of the first BB1 - Black Box Blues Breaker circuit.        * Supply voltage is boosted to 18 volt       * Increased minimum gain level       
- External toggle switch for selecting between std. gain and high gain mode. 
- Internal presence trim potentiometer 

- Internal dip switches for clipping diode settings.
    * 4-diode symmetrical clipping (default)    * 6-diode symmetrical clipping for less compression.    * Open setting with no clipping diodes, high headroom and loads of output. 
- NOS Telefunken clipping diodes

The Triple Gain is built using carefully selected top shelf components:- VISHAY 1% metalfilm resistors- WIMA MKP10, MKS4 and FKP2 film capacitors - no electrolytes in the audio circuit.- VIMEX sealed potentiometers- Taiway footswitches - TAIWAY toggle switches- PURE TONE MULTI-CONTACT 1/4" JACK- Silver plated teflon insulated cable for internal wiring.- US made DAVIES MOULDING 1470 and 1400 knobs- Dimension: 7.4 in x 4.72 in x 1.46 in (188 mm x 120 mm x 37 mm)