4ms LEQA Leveling EQ Amplifier End-Of-Chain Audio Processor Module

Iconic pro studio compression and EQ combine forces alongside stereo widening in this versatile mix bus processing module. Everything you need to bring together a sub-mix or apply the final polish to your master output. Supplier's Notes: The Leveling EQ Amplifier is an end-of-chain audio processor designed to polish individual elements of a patch, stereo bus, or full master bus. Inspired by the simple interfaces and pleasing sounds of two cornerstones of mixing, the LA-2A optical compressor and the 1073 EQ, the LEQA combines a compressor, an equalizer, and a modern Stereo Width Processor in one 14HP package.? Rather than being fully parametric, pre-defined curves and frequency selections make the art of mixing intuitive. Very little effort is needed for great sounding mixes. The compressor mimics optical compression, which is a beautifully simple concept that yields incredibly musical results. The EQ section is built to help accentuate and excite your mix, clear up muddled sounds, and increase the overall headroom. The Stereo Width Processor adjusts the stereo image, letting you dial back a wide image into a cohesive sound, or push a normal stereo signal into "super stereo" territory. When used with mono sources, it can widen mono sources into stereo using a combination of psychoacoustic techniques. The Leveling EQ Amplifier excels in live performances, studio work, subtle utility tasks, extreme sonic sculpting, audio "glue" to hold a patch together, and as an effect in its own right. Mechanical: 14HP Eurorack format module 0.98" (25mm) maximum depth (including power cable) Power Consumption +12V: 120mA max -12V: 10mA max +5V: not used Audio: Frequency range (bypassed): 8Hz-24kHz i0.1dB Maximum amplitude: 19.2Vpp CV Input: Voltage range 0V to +5V DSP: 96kHz sample rate, 24-bit codec with 32-bit internal processing 1GHz Cortex-A7 processor