The T2P is a factory matched pair of T2 multi-pattern large-diaphragm condenser microphones with titanium-sputtered capsules. Titanium is stiffer and three times lighter than gold, giving the T2 fast transient response for drums, percussion, and demanding close-miking applications.

Each microphone is hand-crafted with a dent-proof all-metal housing, metal switches, and an innovative close-miking shockmount. The pair is rigorously tested and sonically matched in-house for consistent stereo imaging.

Features

• Factory matched pair of T2 titanium condensers
• Hand-crafted titanium-sputtered true condenser capsule
• Accurate definition and fast transient response
• Switchable cardioid, omnidirectional, figure-eight, and hypercardioid patterns
• Innovative close-miking shockmount (x2)
• 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
• Stereo bar and metal flight case included

Specifications

• Capsule: Hand-crafted 1" true condenser capsule
• Diaphragm: Titanium-sputtered mylar
• Polar patterns: Cardioid, hypercardioid, omnidirectional, figure-8
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: 25 mV/Pa (-32 dBV)
• Max SPL: 137 / 147 / 157 dB (0 / 10 / 20 dB pad, 0.5% THD)
• Equivalent noise level: 13 dB(A)
• Signal to noise ratio: 81 dB
• Low-cut filter: 40 / 80 Hz, 6 dB/oct, switchable
• Attenuation pad: 10 / 20 dB, switchable
• Electrical impedance: 22 ohms
• Connectivity: 3-pin male XLR connector
• Power: 48V according to IEC 61938
• Weight (each): 290 g (10.23 oz.)
• Length (each): 146 mm (5.75 in.)
• Width (each): 58 mm (2.32 in.)
• Diameter (each): 29 mm (1.10 in.)

In the Box

• T2 microphone (x2)
• Custom shockmount with thread adapter (x2)
• Stereo mounting bar
• Metal flight case