Yamaha MG10 and Dual DBR12 Bundle: A Full-Range Small-Venue PA in One Order

This bundle is a complete front-of-house system with the headroom to fill a real room - the Yamaha MG10 10-channel analog console paired with two DBR12 12-inch 1,000-watt powered loudspeakers. The mixer is the brain: four D-PRE mic preamps, three stereo line channels, and per-channel EQ to balance a band, a panel, or a worship team. The speakers are the muscle: two self-powered 12-inch cabinets that each throw 131 dB of clean SPL and reach down to 52 Hz, so most material plays full-range with no subwoofer to add. Bring four mics, plug the stereo outputs into the two speakers, and you have a working PA - no separate power amp to spec, no impedance math, nothing left to source. It is built for the gigging band moving up to bigger rooms, the mobile DJ and wedding pro who needs full-range punch, and the house of worship covering a 100-to-300-seat space.

Four D-PRE Mic Preamps Mean Everyone Gets Their Own Channel

The MG10 carries four discrete Class-A D-PRE preamps on inverted-Darlington circuits, the same transparent front end Yamaha uses across its mixer line. Switchable +48V phantom power drives condenser mics, so a vocal condenser, two dynamic vocal mics, and an instrument can each land on their own channel with their own gain and EQ. Three additional stereo line channels take keyboards, backing tracks, or a media player. Where a smaller mixer forces you to share inputs, the MG10 gives a four-piece band or a four-person panel room to breathe.

3-Band EQ, an 80 Hz High-Pass, and a 26 dB PAD Keep the Mix Clean

Every mono channel has a 3-band EQ - High, Mid, and Low - to shape vocals and instruments without an outboard rack. An 80 Hz high-pass filter clears stage rumble and handling noise on the mic channels, and a 26 dB PAD lets a guitar amp or a close-miked drum hit the input without overloading the preamp. A single AUX send drives a monitor wedge or an outboard effect, and per-channel peak LEDs make gain-staging fast under stage lights. It is the control a small room needs, built right into the console.

Two DBR12 Powered Speakers Bring 131 dB and 52 Hz of Full-Range Output

Each DBR12 is a 2-way bi-amplified cabinet with a 12-inch woofer and a 1.4-inch compression driver, powered by a 1,000-watt Class-D amplifier and capped at 131 dB max SPL. The larger 12-inch driver reaches down to 52 Hz, so kick drum, bass guitar, and DJ low end land with weight that a smaller cabinet cannot deliver - in most rooms you will not need a separate subwoofer. Yamaha's FIR-X tuning uses a linear-phase crossover to integrate the drivers with flat phase response, so vocals stay articulate as you push the level. Onboard D-CONTOUR DSP gives you FOH/MAIN and MONITOR presets - one switch retunes the cabinet for mains duty or floor-wedge monitoring. At 34.8 pounds each with built-in handles, both speakers stay a single-hand lift and pole-mountable for front-of-house placement.

How the Mixer and Speakers Work Together as One System

The MG10's stereo main outputs - available on both XLR and 1/4-inch TRS - feed the two DBR12 cabinets directly. Run them as a stereo pair for front-of-house mains in a mid-size room, or send the AUX out to one DBR12 as a floor monitor while the other covers the audience. Each DBR12 also carries an XLR Mix Out that daisy-chains the post-mix signal, so the pair links cleanly for a stereo PA. Because each speaker has its own amplifier, there is no external power amp to match, no speaker-impedance guesswork, and no extra rack to haul. The console controls tone and balance, the speakers supply clean full-range power, and the whole rig still fits in a hatchback.

For the Gigging Band, the Mobile DJ, and the Growing Worship Stage

If you are a first-time PA buyer, this is the simplest path to professional full-range sound: a mixer you can learn in an afternoon and two speakers that power themselves. If you are upgrading from 10-inch tops or an all-in-one box, the 12-inch DBR12 cabinets give you the low-end weight and SPL headroom to cover a bigger crowd without adding a sub. And if you compare specs before you buy, the numbers hold up - four D-PRE preamps, 1,000 watts and 131 dB per cabinet, a 52 Hz low end, FIR-X tuning, and D-CONTOUR presets. One order, fully matched, ready for the first soundcheck.