sE Electronics sE Electronics sE4400 Large-diaphragm Condenser Microphone with Shockmount 2026 - Black

sE Electronics sE4400 Large-diaphragm Condenser Microphone with Shockmount, Mike Clip & Metal Case

Brand New, never used, still in original packaging

Purchased brand new in 2026, bought more than needed

An excelled addition for any Studio/Recording environment

Multiple Polar Patterns offer a wide range of applications

All original box, accessories/packaging included as well as included Shockmount, Mike Clip & Metal Case

*Offer only valid within lower 48 US States*

>>>See Manufacturers descriptions below<<<

sE Electronics sE4400 Large-diaphragm Condenser Microphone with Shockmount, Mike Clip & Metal Case

sE4400Classic versatility at its finest

Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need.

Recommended Use

Lead vocals, orchestral + strings, drums, overheads, electric guitar cab, piano, acoustic guitar, woodwinds, brass

HighlightsHand-crafted true condenser capsule individually tuned in our own factoryClassic vintage sound and all-metal housingSwitchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioidInnovative close-miking shockmount40 / 80 Hz bass-cut filters and -10 / -20 dB pads

SpecsComponentsCapsuleHand-crafted 1" Gold-sputtered True CondenserDiaphragmGold-sputtered mylar PowerElectrical impedance22 OhmsConnectivity3-pin male XLR connectorPowering48V Phantom Power (P48 according to IEC 61938) SoundPolar patternsCardioid, Hypercardioid, Omni-directional, Figure-8Frequency range20 Hz - 20 kHzSensitivity25 mV / Pa (-32 dBV)Max SPL137 / 147 / 157 dB (0/10/20 dB Attenuation pad - 0.5% THD)Equivalent noise level13 dB(A)Signal to noise ratio81 dBLow-cut filter40 / 80 Hz, 6 dB/Oct, switchableAttenuation pad10 / 20 dB, switchable DimensionsMic weight290 g (10.23 oz.)Mic length146 mm (5.75 in.)Mic width58 mm (2.32 in.)Mic diameter29 mm (1.10 in.) What's in the sE4400 boxsE4400 microphoneCustom shockmount + thread adapterMetal case

Four selectable polar patterns

Loaded with four selectable polar patterns, the sE4400 is more like four mics built into one! No matter what source you’re recording, these polar patterns are up to the task, making the sE4400 an excellent all-around choice for musicians looking to stay within a budget. Recording drums? Flip on the omni switch. Intimate vocals or gentle acoustic guitar? The cardioid and hypercardioid patterns focus in on your source, rejecting all unwanted background noise. The figure-8 switch captures both sides of the mic — a setting that Sweetwater’s studio engineers love for capturing multiple sources, room ambience, or pairing with another mic for stereo recording configurations.

Included shockmount and metal case

Every great mic needs an equally great shockmount — luckily, you get both with sE4400! This mic’s included shockmount cradles your mic on its stand, preventing unwanted noise, vibration, and handling noises while recording. It also keeps your microphone safe and sound when rigged up, and while no one wants an accident to happen, the sE4400’s robust die-cast design is about as durable as a condenser mic can get. When it comes time to pack up the sE4400 after a session, an included metal case keeps the sE4400 in tip-top shape during transport and storage.

Tech Specs

Microphone Type: Condenser

Polar Pattern: Cardioid, Figure-8, Hypercardioid, Omnidirectional

Diaphragm Size: 1" (25.4mm)

Frequency Range: 20Hz-20kHz

Max SPL: 137 dB SPL (0.5% THD @ 1kHz)

Output Impedance: 22 ohms

Sensitivity: 25mV/Pa (-32dB)

Signal to Noise Ratio: 81dB A weighted

Self Noise: 13dB A weighted

Low Cut Filter: 40 / 80Hz (-6dB/octave), switchable

Pads: -10dB, -20dB

Connector: XLR

Color: Black

Power Source: 48V phantom power

Dimensions: 5.75" x 2.32"

Weight: 0.6 lbs.

Included Accessories: Shockmount, Hardshell Case, Threaded Adapter

Manufacturer Part Number: SE4400-U