Handwired 6G3 Brownface Deluxe Circuit 1x12 Combo Recent - Brown

I bought this off of Reverb several months ago, only selling because I was able to score a vintage one, and I already have another 6G3 in a head/cabinet form. Hand wired, in a Mojotone 1x12 cab loaded with a Greenback. I also installed a beam blocker in there.

From the builder: "New set of Tube Depot matched EH 6V6S power tubes, aJJ GZ34 Rectifier tube and JJ preamp tubes. Tested, biased at 70% and ready to plug and play! Features Switchcraft jacks, Belton tube sockets with retainers and shields, Pacific Red Series power transformer and a killer sounding USA made, Heyboer paper interleaved output transformer with 8 ohm speaker out, F&T filter caps, Gavitt cloth covered solid wire, Vishay coupling caps, Vishay 1kv ceramic oscillator caps for the tremolo, new production carbon comp plate resistors for a lil mojo, 3 watt Vishay metal film power resistors in the power supply, Full sized Alpha/CTS pots just to name a few. The amp is built for a long and reliable service life! Eyelet board is 0.093" thick sourced from Mojotone as are the eyelet themselves. The amp has a bright and normal channel as pictured as well as Fender's famous bias tremolo! It also has an adjustable bias pot, additional filtering to the bias node, 1 ohm (1%) bias resistors on the 6V6 cathode for easy biasing in the future. 1.5k grid stoppers on the power tubes, reduced cathode bypass cap on V1 (a&b) from 25uf down to 4.7 uf to tighten up the low end a bit (-2 db at 100hz approx). Increased the filter caps to 47uf and the rest 22uf respectively for reduced power supply hum and better low frequency response, and a more modern grounding scheme which keeps the amp whisper quiet with regards to self noise. Other than what's mentioned above; the amp is stock Fender. All components are within 5% tolerance or better and are higher wattage rated than what the schematic calls for."