Rode Wireless GO (Gen 3) Compact Wireless Microphone System with 2x MagClip GO Magnetic Mounting Clips

Rode Wireless GO (Gen 3) Magnetic Clip Bundle: Hidden Wireless Audio That Backs Up Every Take

This bundle pairs the Rode Wireless GO (Gen 3) — a two-person compact wireless microphone system with 32-bit float recording built into every transmitter — with two MagClip GO magnetic mounting clips, one for each transmitter. It is built for the filmmaker, interviewer, and content creator who needs the mic to disappear on the talent and still cannot afford to lose a take. The Wireless GO handles the audio; the MagClip GO handles placement that a standard spring clip simply cannot, hiding each transmitter cleanly on a tie, a collar, a lapel, or even a set prop. Everything you need to mic two people invisibly and record with a safety net arrives in one order.

32-bit Float Recording on Every Transmitter Means No Take Is Ever Lost

The headline upgrade in the Gen 3 is internal recording. Each transmitter writes a 32-bit float WAV to 32 GB of on-board memory — over 40 hours per unit — while it broadcasts to the receiver. If the wireless link drops, if your subject suddenly shouts and clips the signal, or if the gain was set too low, the recovered file from the transmitter still holds usable audio. For a documentary shoot or a wedding you only get one shot at, that safety net is the reason to choose this system.

Wireless PRO Capsules and GainAssist Take the Guesswork Out of Levels

The built-in microphones come straight from the flagship Wireless PRO — upgraded capsules and preamps with cleaner clarity and more headroom before overload. GainAssist automatically balances the signal at the receiver based on how loud your subject is, so a soft interviewee and a loud presenter both land at a usable level. When you want full control, granular manual gain and tailored presets for DSLR, mirrorless, and phone are a button away. First-timers get audio that works out of the box; experienced shooters keep every override.

USB-C, 3.5mm, and Direct Connect Bluetooth Cover Every Camera and Phone

The receiver outputs over a 3.5mm analog jack for cameras and over USB-C for phones, tablets, and computers, where it appears as a USB microphone with no interface required. Direct Connect lets you pair a transmitter straight to an iOS phone over Bluetooth via the Rode Capture app — leave the receiver at home for the lightest possible rig. The locking 3.5mm TRS input on each transmitter accepts external lavaliers with plug-in power detect, and the included USB-C, Lightning, and TRS cables plus the SC33 charging hub connect to whatever gear you already own.

Two MagClip GO Mounts Hide the Transmitters Where a Spring Clip Can't Go

A standard spring clip is fine for a waistband, but it fails the moment you need the mic on a tie, a thin t-shirt, or hidden inside wardrobe. Each MagClip GO is a two-piece magnetic mount — the transmitter sits against the outside of the garment and a neodymium magnet holds from behind, with the fabric sandwiched between. No pin holes, no visible clip jaw, no sag on light fabric. With two clips in the box, both transmitters get the same clean, hidden placement, so a two-person interview looks as good as it sounds. You can even mount a transmitter discreetly on a set prop to capture dialogue where there is no one to clip to.

For the Solo Filmmaker, the Two-Person Interviewer, and the Creator Who Cares How the Shot Looks

If you shoot alone and need both audio insurance and invisible mic placement, this is your kit. The first-timer gets a wireless system that just works and the clips that make it look professional. The upgrader moving from a Wireless GO II gets on-board 32-bit float recording, Wireless PRO capsules, and a locking input — plus the magnetic mounts that finally solve placement. The comparison shopper gets the hard numbers: 853 ft range, 7-hour battery, 32 GB per transmitter, and two MagClip GO mounts, all in a single purchase.