Audio-Technica AT-LP60XBT-BK Fully Automatic Wireless Bluetooth Turntable Bundle with Pioneer DJ DM-50D-BT 5-Inch Powered Monitor Speakers and Hosa CRA-204 13.1-Foot RCA Cable

Audio-Technica AT-LP60XBT-BK Bundle: A Complete Wireless Vinyl System in One Box

This bundle is built for the listener who wants to play records the day the box arrives, without sourcing a separate amplifier, speakers, or cables. The Audio-Technica AT-LP60XBT-BK is the hero — a fully automatic belt-drive turntable with a built-in switchable phono/line preamp and Bluetooth wireless output. The Pioneer DJ DM-50D-BT 5-inch powered monitors give the system real speakers with their own amplification, and the Hosa CRA-204 13.1-foot RCA cable wires the two together for a clean wired signal path. Set the turntable down, connect the monitors, drop the needle — the entire chain is here.

Fully Automatic Operation Removes Every Step Between You and the Music

The AT-LP60XBT-BK handles the mechanics so you don't have to. Press start and the platter spins up, the tonearm lifts, swings over, and lowers onto the lead-in groove on its own; at the end of the side it returns and stops automatically. There is no cueing lever to fumble, no risk of dragging the stylus across the label. The integral Dual Moving Magnet VM cartridge ships with a replaceable ATN3600L diamond stylus already mounted and tracking, so there is no cartridge alignment to learn. For a first-time vinyl buyer, this is the turntable that plays records the way you expect them to.

Bluetooth Output Plus a Built-In Preamp Makes the AT-LP60XBT-BK Connect to Anything

Most turntables force a choice: buy a model with a preamp, or buy a separate phono stage. The AT-LP60XBT-BK has the preamp built in and switchable — flip it to line level to drive powered speakers directly, or to phono level to feed a receiver with its own phono input. On top of that, Bluetooth output with aptX codec support streams the same vinyl signal wirelessly to Bluetooth speakers or headphones, so you can place the listening end of the room anywhere. The anti-resonance die-cast aluminum platter and redesigned tonearm keep that signal warm and full at both 33-1/3 and 45 RPM.

The DM-50D-BT 5-Inch Monitors Turn the Turntable Into a Real Sound System

A turntable needs powered speakers to make sound, and the Pioneer DJ DM-50D-BT pair delivers that with room to spare. Each monitor carries a 5-inch fiberglass woofer and a 3/4-inch soft-dome tweeter driven by 25W of Class-D amplification with onboard DSP. A DJ Mode and Production Mode switch retunes the response for either punchy, energetic playback or flatter, accurate reproduction. Connect the turntable to the RCA input with the included cable, or stream to the monitors over Bluetooth 5.0 with aptX Low Latency — the monitors accept both, plus 1/4-inch TRS and 3.5mm sources, and include a front-panel headphone jack and level knob.

The Hosa CRA-204 13.1-Foot Cable Wires the System With Room to Place Speakers Anywhere

The Hosa CRA-204 is the connective tissue of the bundle: a dual RCA to dual RCA stereo interconnect that carries the turntable's line output to the monitors' RCA input. At 13.1 feet it reaches well past the typical too-short factory cable, so the monitors can sit at the far edge of a desk, on stands, or across a shelf. Oxygen-free copper conductors and OFC spiral shielding reject the EMI and RFI hum that turns a quiet passage into a buzz, and nickel-plated plugs seat firmly and resist corrosion over the life of the system.

How the Turntable, Monitors, and Cable Work Together as One System

Each piece solves a specific link in the chain. The turntable spins the record and amplifies the cartridge signal to line level with its built-in preamp. The Hosa cable carries that line signal across the desk to the monitors. The DM-50D-BT monitors amplify it and play it through real 5-inch drivers. Want to go wireless instead? The turntable's Bluetooth output pairs to the monitors' Bluetooth input, and the cable stays in the box as a backup. Either path is complete out of this single purchase — there is no missing amplifier, no speaker to match, no cable to measure and order.

For the First Vinyl Buyer, the Bluetooth Listener, and the Desktop Setup

If this is your first record player, the bundle removes every decision that usually stalls a first vinyl purchase — it arrives complete and automatic. If you want a cable-free room, the turntable and monitors both speak Bluetooth aptX, so you can stream the signal end to end. If you are building a compact desktop or shelf system, the 5-inch monitors and 13.1-foot cable let you place speakers exactly where the room wants them. One order, three components, a complete wireless-capable vinyl system ready to play.