DBX  Zone Pro 1641 Digital Zone Processor

Fully working 100%.  
Comes with Phoenix rear terminal connectors as well as AC cable. 

Fully tested with ZonePro Designer 3.3 software for proper networking operations. 

Features:
Advanced Feedback Suppression (AFS™)

• Autowarmth®
• Auto Gain Control
• Compression
• Limiting
• Noise Gating
• Notch Filtering
• Bandpass and Crossover Filters
• Parametric EQ
• Security Lockout
• Wall Panel Control
• RS-232 Control
• Windows® GUI
• IEC, UL and CSA Approvals

Specifications

Input(6 total) (2) Switchable line or mic inputs (4) RCA Source

Input ConnectorsEuroblock (Line and Mic) RCA (Source)

Input TypeElectronically balanced/RF-filtered

Input Impedance50k ohm balanced, >75k ohm unbalanced

Max Input+20dBu Mic/Line, +12dBu RCA

CMRR>40dB, typically >55dB @ 1 kHz

Mic Preamp gain30 to 60dB

Mic Preamp Equivalent Input Noise (EIN)<-118dB

Mic Preamp Phantom Power15V

Output4 total

Output ConnectorsEuroblock

Output TypeElectronically Balanced, RF Filtered

Output Impedance120 ohms balanced, 60ohm unbalanced

Max Output+20dBu

A/D Converterdbx Type IV™ conversion system

A/D Dynamic Range(line) >113 dB, A-weighted, >110 dB unweighted

Type IV Dynamic Range>119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW

Digital OutputRCA 24-Bit oversampling

Digital Output Dynamic Range>114 dB A-weighted, 110dB unweighted

Sample Rate48kHz

D/A Dynamic Range112 dB A-weighted, 109dB unweighted

Dynamic Range>109 dB A-weighted, >106 dB unweighted

THD+Noise0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response20Hz - 20kHz, +/-0.5dB

Interchannel Crosstalk>80dB typical

Propagation Delay0.6 msec

Operating Voltage100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz

Power Consumption29 W

Unit Weight6.8 lbs.(3.1 kg)

Shipping Weight8.8 lbs. (4.0 kg)

Dimensions1.75” H x 5.75” D x 19” W

Safety Agency CertificationsUL 600065, IEC 60065, EN 55013, E60065

Thanks For Looking !  ! !