MARSHALL JCM 800 DUAL CHANNEL


THREE-TUBE SYNERGY PREAMP MODULE


Few amplifiers have achieved the near-mythical status of the Marshall JCM 800. When it first appeared in the early 1980s, it didn't just define an era, it set it ablaze. Ushering in a new generation of tones, the JCM 800 became the iconic voice of hard rock and heavy metal. Powerful, aggressive, and quintessentially British, it took the fundamental crunch of the Plexi and added the gain, power, and precision that propelled a whole generation of virtuoso guitarists.


The Marshall JCM 800 2203 (100W) and 2204 (50W) circuits, with their single channel, cascading gain stages, and signature midrange response, delivered an unparalleled level of authority and articulation. It was the perfect balance of power and precision. For countless guitarists, the JCM 800 isn't just an amp: it's the amp.


Now, Synergy and Marshall have teamed up again to bring you, for the very first time, this legend in a three-tube, two-channel preamp module. Using Marshall's original circuitry, the JCM 800 delivers the raw energy, attack, and precise overdrive of the iconic vertical-input 2203/2204 amps. Whether you're looking for the three-dimensional crunch of '80s rock or powerful saturation for modern metal, the JCM 800 offers the legendary sonic experience that defined a generation.


TWO-CHANNEL, THREE-TUBE PREAMP

Each of the JCM 800's two identical channels features independent preamp, bass, mid, treble, presence, and volume controls, giving you complete control over your gain and tonal response. From dynamic low-gain crunch to high-gain saturated sustain, the JCM 800 module reproduces every nuance of the original amp's sound. Independent master volume controls for each channel allow for precise balancing of rhythm and lead levels, while preserving the amp's dynamic character and harmonic complexity.


THREE-TUBE MODULE WITH INTEGRATED 0-WATT POWER AMPLIFIER - A SYNERGY FIRST


The JCM 800 module introduces Synergy's revolutionary three-tube architecture, a first in modular preamp design.


Beloved by generations of musicians, the original JCM 800 revealed its full power at full volume, thanks to the magical interplay between its preamp and power amp stages. Synergy has now captured that same raw energy and unmistakable feel in a compact modular format. Two 12AX7 tubes power the preamp, while a third 12AX7 powers the integrated 0-watt power amp and phase inverter. With the JCM 800 Module, you get the swag, feel, and harmonic richness of a JCM 800 head cranked to the max, at any volume.


The JCM 800 Module delivers the power, grit, and bite that made this amp an icon in rock history, while propelling Synergy's modular platform into bold new sonic territory.


BRIGHT AND HIGH/LOW INPUT SWITCHES


Building on the original amp design, the JCM 800 module offers increased flexibility thanks to two key features:


• Bright Switch: A three-position switch lets you choose between two brightness capacitor values ​​or turn it off completely. This allows you to adjust the attack and clarity of the preamp stage, from a crisp, biting tone to a warm, mellow one. It's like changing the brightness capacitor on a vintage 2203,


without the need for soldering. • High/Low Input Selector: Faithfully replicates the two input jacks of the original JCM 800, allowing you to switch between the high-gain "Lead" input and the lower-gain "Normal" input.


This lets you instantly switch from a classic, punchy crunch to a modern overdrive.


• CATHODE SELECTION FUNCTION


The Marshall JCM 800 module features a three-position selector switch on the circuit board, allowing you to

configure the input tube's bass response to match the original circuitry of the selected module. These

settings affect the feel and accuracy. Every amp designer uses a specific combination of components

for their input tube circuitry. We've selected the three most popular combinations,

accessible via this switch: Position 1 (1.5 kΩ resistor and 22 µF capacitor), Position 2 (2.7 kΩ resistor and 0.68 µF capacitor), and Position 3 (1.8 kΩ resistor and 1 µF capacitor). Of course, you can

experiment and try different positions to determine the one that works best for you. The JCM 800 module is preset to the

center position (2.7 kΩ resistor and 0.6 Ω capacitor)

8 µF).


Synergy hardware and interchangeable preamplifiers are protected by a U.S. patent.


The JCM800 module is compatible only with SYNERGY hosts (SYN-1, SYN-2, SYN-20IR, SYN-30, SYN-50).


It is incompatible with any other hardware from any other manufacturer. FEATURES OF THE MARSHALL THREE-TUBE MODULE:


• Authentic three-tube preamp inspired by the legendary Marshall JCM 800 (2203/2204

Vertical Input)


• Three 12AX7 preamp tubes for optimal harmonic richness and dynamics


• Built-in 0-watt power amplifier and phase inverter for a feel similar to a traditional amp


• Two identical channels, each with the following controls: Preamp, Bass, Mid, Treble, Presence


• Independent master volumes for rhythm and lead playing


• Bright switch (three positions) to adjust the brightness capacitor value for tone shaping


• Input up/down switch that replicates the original JCM 800 input


Behavior


• On-board cathode selector for adjustable tube response


• Easy installation and removal from Synergy preamp docking stations

Questo articolo è venduto "Come da descrizione”

Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.

Annunci simili in promozione













CondizioneNuovo (Nuovo)
Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più
Marchio
Modello
  • JCM 800
Finish
  • Gold et noir
Categorie
Anno
  • 2026
Prodotto in
  • Stati Uniti

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Informazioni sul venditore

DRUMMOND MUSIQUE

Drummondville, Canada
Iscrizione a Reverb::2016

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.