Rode PSA1+ Pink: A Color-Matched Pro Studio Arm Engineered for Silent, Stable Mic Positioning

The Rode PSA1+ in Pink is the premium studio boom arm built for podcasters, streamers, and broadcasters who want serious mechanical performance and a color-coordinated rig in the same purchase. Rode's parallelogram spring design holds the mic placement constant as you adjust height — no nodding capsule, no sag mid-take — and the fully damped internal springs paired with a neoprene arm cover make every adjustment silent. You hear your voice on the broadcast, not the arm. The pink colorway delivers Rode's full pro-tier mechanical spec with a finish made for ASMR, beauty creators, lifestyle streamers, and anyone building a color-coordinated studio aesthetic.

37-Inch Horizontal and 34-Inch Vertical Reach Built for Real Desk Geometry

The PSA1+ extends 37 inches horizontally and 34 inches vertically — enough range to position the mic naturally at mouth height on a deep desk without leaning in. Full 360-degree horizontal rotation and 90 degrees of vertical motion let you swing the mic between guests for a two-host shot, drop it into voice-over position, or lift it cleanly out of camera frame between scenes. Rode's mechanism stays balanced at every angle — when you let go, the mic stays exactly where you placed it. No slow drift. No re-tightening between takes.

Silent Operation Means the Mic Captures Your Voice, Not the Arm

Cheaper boom arms creak, click, and ring through the mic when you reposition them. The PSA1+ solves this in two ways. First, the springs are fully damped and sleeved inside the metal frame — they don't vibrate against the arm body. Second, the entire arm is wrapped in a neoprene cover that absorbs incidental contact noise. Repositioning the mic during a live broadcast or a long voice-over session no longer ruins the take. Combined with rubber contact points on the desk clamp that isolate the arm from keyboard and mouse vibration, the PSA1+ keeps every kind of desk noise out of the recording.

0.2 to 2.7 Pound Load Range Covers Every Mic You'll Use

The PSA1+ handles microphones from 0.2 lb up to 2.7 lb (94 g to 1.2 kg) — a load range that covers compact USB mics like the Rode NT-USB Mini, broadcast dynamics like the PodMic and Procaster, large-diaphragm studio condensers like the NT1, and on-camera shotguns like the VideoMic NTG. The 3/8 in-16 standard mount thread with included 5/8 in-27 adapter fits virtually every studio mic and shockmount on the market. The arm accepts end-address mics in downward orientation and side-address condensers in upright position with equal stability — no special bracket required.

Integrated Cable Management Keeps XLR and USB Runs Out of the Shot

The top of the arm features external cable raceways with snap-in clips that hold XLR or USB cables tight against the arm. Cable runs flow cleanly from the mic down to your interface or computer with nothing dangling in the camera frame. This matters as much for camera-on streamers as it does for off-camera podcasters — a tidy cable run signals a real studio, not a dorm-room setup. The raceway accommodates standard XLR cables and USB-A or USB-C runs equally well.

Two Mounting Options: C-Clamp for Standard Desks, Threaded Insert for Permanent Studios

The PSA1+ ships with both a deskmount C-clamp (handles desk edges up to 2.2 inches thick) and a threaded desk insert (drills into permanent studio desks up to 2.7 inches thick). The clamp version installs in seconds with no tools and removes just as fast — good for renters, room reconfigurations, or shared setups. The threaded insert mounts permanently for studios where the arm lives on the same desk forever. High-quality locking nuts on the mounting system make angle adjustments easy and tension-secure, so once you've dialed in the perfect position it stays there through the session.

Pink Color-Matched for Streamers, ASMR Creators, and Lifestyle Content

Pink is part of a deliberate Rode colorway expansion that includes red, blue, orange, purple, and green PSA1+ variants. The pink finish reads as a deliberate aesthetic choice on camera — pairs cleanly with the Rode WS14 pink pop filter, Rode 3-meter pink XLR cables, and the broader pink-themed creator setups popular in ASMR, beauty, lifestyle streaming, and color-coordinated podcast studios. The mechanical spec is identical to the black PSA1+ — same silent operation, same load range, same reach — so you're getting full pro performance with a finish that completes the visual setup.

Compatible With Most Rode Mics and Standard Shockmounts

The PSA1+ works with the PodMic, PodMic USB, Procaster, Broadcaster, NT1, NT1-A, NT-USB, NT-USB Mini, NT-USB+, VideoMic NTG, XDM-100, XCM-50, and most third-party studio mics within the load range. Compatible with all standard shockmounts excluding the Rode SM5 and excluding lavalier, mobile, wireless, and headset microphones. Whether you're upgrading from a desk tripod to a boom arm or replacing a noisy entry-level arm, the PSA1+ is the silent, stable, color-coordinated mount most podcasters and streamers eventually buy.