Firebird Platypus Vintage Cherry

Mahogany body with neck-through appearance, glued-in, set mahogany neck with SlimTaper profile, rosewood fretboard, and "Platypus" style headstock, historically accurate Firebird Alnico 5 humbuckers, hardshell case.

Paying tribute to the rare transitional models from 1965

In early 1965, the original Firebird™ design transitioned through several different iterations. One of the significant transitions that occurred flipped the headstock to the Non-Reverse shape. Unlike the original Reverse Firebird headstock design, which featured a two-layered headstock with a holly veneer, the new headstock was flat, like the bill of a platypus. The Platypus-style Firebird featured six-in-line tuners rather than the banjo-style tuners that were used on previous Firebird models. The Firebird Platypus pays tribute to those rare transitional models. It features a mahogany body with a glued-in, set neck and the appearance of a traditional neck-through Reverse Firebird body. The mahogany neck has a fast-playing SlimTaper™ profile and a rosewood fretboard with a 12” radius, 22 medium jumbo frets, and acrylic trapezoid inlays and sports the Platypus-style headstock with a Graph Tech® nut and Grover® Mini Rotomatic® tuners. The Platypus-style headstock has been slightly modified to provide straight string pull for less friction and improved tuning stability. The other ends of the strings are routed over a Nashville Tune-O-Matic™ bridge for precise intonation and solidly anchored with an aluminum Stop Bar tailpiece for outstanding sustain. The Firebird is one of the most distinctive-looking guitar designs ever, and the Firebird Platypus takes this legendary guitar a step further with its unique appearance. Its tone is just as unique due to its two articulate, historically accurate Firebird mini humbucker™ pickups. They are equipped with Alnico 5 magnets and can deliver tones with a nearly bell-like chime when played clean and great rock and blues tones that easily cut through the mix when pushed. Individual volume and tone controls allow you to tailor the sound even further, and of course, the pickguard features the legendary hot-stamped Firebird graphic. A Gibson hardshell case is also included.

Key Features

• Mahogany Body with the Appearance of a Traditional Neck-Through Firebird Body
• Glued In Mahogany Neck with a SlimTaper Profile
• Rosewood Fretboard with 12" Radius, 22 Medium Jumbo Frets, and Acrylic Trapezoid Inlays
• Platypus-style Headstock with Six Grover Mini Rotomatic Tuners
• Two Firebird Humbucker Pickups
• A Gibson Hardshell Case is Included

Body Style

Firebird

Body Shape

Reverse Firebird

Body Material

Mahogany

Binding

Single Ply, Fretboard

Body Finish

Gloss Nitrocellulose Lacquer

Profile

SlimTaper

Scale Length

628.65 mm / 24.75 in

Fingerboard Material

Rosewood

Fingerboard Radius

304.8 mm / 12 in

Neck Material

Mahogany

Fret Count

22

Frets

Medium Jumbo

Nut Material

Graph Tech

Nut Width

43.053 mm / 1.695 in

End Of Board Width

57.404 mm / 2.26 in

Inlays

Acrylic Trapezoid

Joint

Glued In, Set Neck

Finish

Chrome

Bridge

Aluminum Nashville Tune-O-Matic

Tailpiece

Aluminum Stop Bar

Tuning Machines

Grover Mini Rotomatic

Pickguard

White 3-ply

Truss Rod

Adjustable

Control Knobs

Gold Top Hat with Silver Reflector

Switch Tip

White

Strap Buttons

2

Neck Pickup

Firebird Mini Humbucker

Bridge Pickup

Firebird Mini Humbucker

Controls

2 Volume, 2 Tone

Pickup Selector

3-way Toggle

Output Jack

1/4"

Strings Gauge

.010, .013, .017, .026, .036, .046

Case

Hardshell

Accessories

Includes Gibson Accessory Kit