TonePros Replacement ABR-1 Tune-O-Matic Bridge

TheTonePros AVR2 is the exact replacement for the bridges found on olderor vintage instruments originally fitted with ABR-1 style bridges. Thislocking model has the complete appearance of the vintage part, but hasmany upgrades including more intonation range and saddles that are"engineered" solid, preventing "lift" against the retainer wire.Retrofit for most Vintage and reissued USA guitars without modification.Extra tight construction eliminates rattles and improves sustain.

What TonePros Components Do For You:

TonePros componentscompletely solidify your instrument! Your System II bridge will not onlyjust stay on, our system solidifies your bridge in place like stone! Inmost cases after installation and adjustment, your bridge and tailpiecewill not move or "wiggle" at all. Because of TonePros design, evenplay or movement in the threads is reduced so that when you adjust youraction and intonation, it is set and solid. This of course improves yoursustain and tonal qualities, makes harmonics "jump" out of your guitar,and causes your instrument to play and stay in tune better.

Use Your Vintage Instrument:

Itis now possible for musicians to actually use their "vintage"instruments without the fear of marring and modification and still getultimate results. Put those vintage components back in the case wherethey belong for preservation while you play your favorite guitar withimproved tonal qualities. Simply reinstall the old, preserved componentswhen you go to show or sell that special instrument.

New Instruments:

Ifyour new or recently purchased instrument did not come with System IIcomponents installed at the factory, simply replace your current bridge& tailpiece with our upgraded components. Just adjust and thensecure with the allen tool provided, and your guitar will play and stayin tune better. Your guitar will not come apart when the strings aretaken off and it will sound and sustain like never before!

Do The Test For Yourself

Nexttime you have the strings off of your guitar, hold your bridge betweenyour thumb and index finger while it still rests on your guitar andwiggle it. If it moves (and it will), you are not getting the intonationand harmonics you deserve, especially after the size of the investmentyou have made in that special guitar. The greater the wiggle, thegreater the problem. TonePros Patent Issued components have thesolution, isn't it time you get the tone and results you expect anddeserve?

• Thread = 6/32 US Thread (ABR1 Thread)
• Post to Post Spacing = 2.91 Inches / 73.75mm
• Saddle Notch = Un-Notched Saddles
• Saddle Material = Brass
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch