The PRO 92cW is a headworn condenser microphone with a flexible boom and a shaped earpiece that fits over your left or right ear. It has a frequency response that is optimized to reproduce clear speech without coloring the sound. It features an omnidirectional polar pattern which is designed to provide a large acoustical pick up radius. This helps to ensure that your speech or performance is captured accurately and it allows you to speak comfortably with the mic sitting near the corner of your mouth. The mic is fitted with a windscreen to filter out pops from breath and wind noise and it has a 55" cable that terminates with a locking 4-pin connector which plugs into the ATW-T1001 UniPak pocket transmitter.

The ATW-1101/H92-TH wireless system is engineered to quickly find the best signal possible, utilizing an automatic frequency selection function that chooses open bands for you when you "pair" your transmitter with the receiver. Also designed to combat interference, the ATW-1101/H92-TH uses three different diversity techniques. Using frequency diversity, the system sends the wireless signal on two separate channels simultaneously and chooses the one with the clearest signal. It also transmits the signal across multiple intervals in time in order to fight multipath interference. This is known as time diversity. Furthermore, the system also makes use of space diversity, choosing between the receiver's dual antennas depending on which is picking up the best signal integrity.

Key Features

• Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems
• Microphone designed to wIt'stand everyday wear and tear
• Includes clothing clip to prevent the weight of the cable from pulling the headset
• Includes pouch for mic storage
• Level controls on transmitter and receiver
• Pair indicator illuminates on receiver when synced with transmitter
• AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping

Technical Specs

IncludesAudio-Technica PRO-92CW Omnidirectional Headworn MicrophoneATW-T1001 System 10 Digital UniPak TransmitterATW-R1100 System 10 Digital Wireless ReceiverWindscreenClothing ClipMic Carrying PouchPower SupplyAudio-Technica 2 Years Limited Warranty

Operating Frequencies2.4 GHz ISM bandDynamic Range>109 dB (A-weighted), typicalTotal Harmonic Distortion<0.05% typicalOperating Range30m (100') typicalOperating Temperature Range0deg. C to +40deg. C (32deg. F to 104deg. F)Frequency Response20 Hz to 20 kHzAudio Sampling24 bit / 48 kHzReceiver: Receiving SystemDiversity (frequency/time/space)Receiver: Maximum Output LevelXLR, balanced: 0 dBV1/4" (6.3 mm), unbalanced: +6 dBVReceiver: Power Supply100-240V AC (50/60 Hz) to 12V DC 0.5A (center positive) switched mode external power supplyUnipak Transmitter: RF Output Power10 mWUnipak Transmitter: Spurious EmissionsFollowing federal and national regulationsUnipak Transmitter: Input Connection1x 4-pin locking connectorWiring: Pin 1: GND / Pin 2: INST INPUT / Pin 3: MIC INPUT / Pin 4: DC BIAS +9VUnipak Transmitter: BatteriesTwo 1.5V AAUnipak Transmitter: Battery Life>7 hours (alkaline)Microphone: ElementCondenserMicrophone: Polar PatternOmnidirectionalMicrophone: Frequency Response20 Hz - 20 kHzMicrophone: Open CircuIt'sensitivity-45 dB (5.6 mV) re 1V at 1 PaMicrophone: Maximum Input Sound Level116 dB SPL, 1 kHz at 1% T.H.D.Microphone: Signal-to-Noise Ratio60 dB, 1 kHz at 1 PaMicrophone: Current Consumption0.3 mA typical at 5VMicrophone: Voltage Range1.5 - 9VMicrophone: ConnectorLocking 4-Pin HRS connectorMicrophone: Cable Length55" (1.4 m)Microphone (L x D) 0.85 x 0.36" / 2.15 x 0.91cmBoom: 4.33 x 0.09" / 10.99 x 0.22cmDimensions (W x H x D)Receiver: 7.48 x 1.82 x 5.06" / 18.99 x 4.62 x 12.85cmUnipak Transmitter: 2.76 x 4.21 x 0.98" / 7.01 x 10.69 x 2.48cmWeightReceiver: 290 g (10.22 oz)Unipak Transmitter: 100 g (3.52 oz)Mic and boom: 0.14 oz (3.96 g)Mic, Boom, Connector and Cable: 0.84 oz (23.81 g)