L-PAD SPEAKER L PAD SPEAKER VOLUME CONTROL VARIABLE POWER SOAK 100 WATTS

*******************SEE MY OTHER LISTINGS!!!*************

Up for grabs are these hard to find "L-Pads".

These are used to control the volume of a loudspeaker, ( and keep a constant load to your amp) and can also be used as a variable "Power-Soak" for you guitar players, who want to run your amp settings higher to get to the sweet spot of it's power curve, yet only feed the speaker a smaller percentage of that power.

These are an advantage over a regular "Power-Soak" resistor, because THOSE are FIXED VALUES, and you only get one result.

The beauty of an L-pad is - it's like a potentiometer or volume control for a speaker, YOU can control the output, and it MAINTAINS A CONSTANT LOAD to your amplifier, unlike trying to use a regular potentiometer, which will smoke your amp.

These are 8 Ohms and are the ceramic base 100 watt models!!! Hook up is simple, with 3 tabs- a common ground for the in/output, a signal in tab, and a signal out tab...

GREAT for adding to midrange or tweeter circuits to blend with the woofer, for sound distribution, and as a variable power soak.

Includes the mounting washers and nut, and I even have the recessed housings if you want to do a pro looking job on your install..

******* SOLD AS-IS-ELECTRONICS******

So, if you want to control the volume of pretty much any speaker and maintain a constant load- then here ya' go!

ANY questions or concerns, just ask.

THANKS GUYS!