Bigsby Vibrato - Vibramate Set, B7 / V7-335, for Gibson ES-335, Color / Spacing: Silver / 8.5"

This is a complete set that includes an original Bigsby B7 and a matching Vibramate V7-335 for use with most standard 335 sized arch top guitars with stop tailpiece and tune-o-matic bridge. Please see sizing chart for correct spacing measurements.

Vibramate V7-335 Kit includes the Vibramate V7 mounting plate with felt-pads on the bottom for a soft touch to the top of your guitar. The V7-335 kit includes felt-padded tailpiece plate for mounting the hinge-plate of the Bigsby B7 to the strap pin hole at the lower end of your guitar. The Vibramate V7-335 kit also includes the "CUSTOM MADE" nameplate cover with adhesive backing that completes the kit’s classic installation appearance.

Please refer to the diagram to check mounting dimension requirements for your specific guitar before ordering. Be sure to follow the mounting instructions to prevent damage to your instrument.

Bigsby B7 Includes:

• Tremolo
• Arm Assembly
• 6 Mounting Screws
• Spring
• Plastic Washer
• Installation Instructions

Bigsby B7 Specifications:

• Model Name: B-7
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate weight: 354 grams/12.5 oz.
• Overall Length: 8 ¾" /222.3 mm
• Overall Width: 3 ⅝" /92.1 mm

Arm adjusts with ⅛" Allen wrench and 5/16" socket wrench

Compatible Guitars: (Not limited to this list only. See dimensions drawing to determine compatibility with unlisted guitars. Please see sizing chart to determine if your guitar from this list requires the E-Series (8.0") or G-Series (8.5").)

Gibson® ES

• 50th 1960 335TD
• 1959 ES-335 Dot
• 1963 ES-335
• BB King Lucille
• BB King Lucille Ltd
• ES-137 Classic
• ES-175 Custom
• ES-335 Block
• ES-335 Dot
• ES-359 Custom
• Larry Carlton ES-335
• Chet Atkins Tennessean

Ephipone® ES

• Dot - 335
• Dot Studio - 335
• Lucille
• Sheraton
• Sheraton II
• Tom Delonge

For a list of compatible guitar models, see this page.

Product Measurements

B7 Length: 8.75 in.
B7 Width: 3.625 in.
B7 Mounting Hole Diameter: 0.125 in.
B7 Mounting Plate Width: 1.75 in.
V7-337 Spacing: 8.5 in.