(Mint) Clear-Com DX210-CZ11513 4-Up DX210 System with CC-15-MD4 Headsets

The HME DX210 simply and seamlessly blends wireless intercom performance with wired intercom systems. It's paired with the rugged BP210 belt pack (4) and CC-15-MD Headset (5). Operating in the 2.4 GHz band, the DX210 delivers sound clarity and enables interference-free communication for highly demanding productions.

Includes

• BS210 license-free base station with 2 antennas and 115-230 VAC power supply + 115 VAC power cord
• (4) BP210 Beltpacks with 8 BAT41 batteries and 4 pouches
• (5) CC-15-MD4 single-ear noise-canceling headsets
• AC40A Battery Charger with 115-230 VAC power supply + power cord
• Manual

Features

• Expandable up to 3 additional base stations (additional units sold separately)
  • "Spectrum Friendly" design will co-exist with other 2.4 GHz devices in the same bandwidth
  • Up to 15 COMMUNICATOR®s can be assigned to each base station. In the 2-channel mode, any three COMMUNICATORs can be speaking simultaneously and in the selectable 1-channel mode, any four COMMUNICATORs can be speaking simultaneously.
  • Expandable system enables up to four synchronized co-located base stations to be used together for a total of 60 COMMUNICATORs with up to 16 in hands-free, full-duplex mode.
  • Wired Intercom Input/Output interfaces make DX210 compatible with existing 2-wire partyline or 4-wire matrix systems from Clear-Com or RTS
  • Wireless ISO Talk-around allows all wireless users on the same base station to talk with each other, isolated from either two- or four-wire intercom channel. ISO function can be restricted to specific users.

Specifications

• CC-15-MD4 headset:
  • Single-ear headset
  • Enclosed earphone
  • Leatherette ear pads
  • Electret microphone
  • Mini DIN connector
  • Microphone Unit:
    • Impedance: 2.2 kΩ +30%
    • Sensitivity: -51 dB, +3 dB (0 dB – 1 V/Pa, 1 kHz)
  • Speaker Unit
    • Impedance: 40 Ω +15% (1kHz)
    • Max Power: 100 mW (2.0 V RMS)
    • Frequency Range: 20 Hz – 20 kHz (-15 dB/1 kHz)
    • Output SPL: 106 dB = +2.0 dB
    • Input: 1 mW (0.2 V RMS)
  • Weight: 6 oz. (170 g) without cable, 8.1 oz. (230 g) with cable
• Note: additional specifications and information can be found within the items located under the "Documentation" tab above.