Indoor Outdoor Speaker

The Control 25-1 is a two-way 5†speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

Key Features

  • Components: 5-¼†woofer with woven fiberglass cone, 3/4†PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall mounting hardware, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt
  • 70V/100V multi-tap transformer.
  • High fidelity sound character with broad frequency response of 60 Hz – 20 kHz

Technical Specifications

Frequency Range (+/-10 dB) : 60 Hz to 20 kHz
Frequency Response (+/-3 dB) : 85Hz - 17 kHz
Power Rating : 200 W Continuous Program (2 hrs)
100 W (400W peak), Continuous Pink Noise (2 hrs)
75 W (300W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage : 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL : 110 dB ave. Continuous Pink Noise (116 dB peak)
Sensitivity : 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle : 100° x 100°
Directivity Factor (Q) : 6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI) : 7.6dB (averaged 1kHz – 16kHz)
Nominal Impedance : 8 ohms (THRU setting)
Crossover Type : 2nd order low-pass, 3rd order high-pass
Transformer Taps : 70V: 30W, 15W, 7.5W, 3.7W
100V: 30W, 15W, 7.5W
Insertion Loss <0.94 dB at any tap setting
Thru Setting: 8Ω nominal
Recommended Protective
High-Pass : 60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).
Low Frequency Driver : 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver : 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kaptonâ„¢ voice coil former.
Enclosure Material : High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille : Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMaxâ„¢ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation : InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Environmental : IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMaxâ„¢ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMaxâ„¢ grille for breaking up driving rain and for especially difficult environments.
Termination : Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency Rating : ROHS-compliant; Transformer UL Recognized per UL1876
Colors : Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D) : 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight : 3.4 kg (7.5 lbs)
Shipping Weight : 8.16 kg (18 lbs) for the pair-pack (for 2 speakers)
Included Accessories : InvisiBallâ„¢ wall-mounting system), 6 mm x 100 mm hex key
Optional Accessories : MTC-25UB-1 – Yolk-type U-bracket (&-WH)
MTC-25WMG-1 – WeatherMax grille with backing (&-WH)
MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • Control 25-1 Compact 2-Way Indoor/Outdoor Passive Surface-Mount Loudspeakers (Pair)
Categories
Electronics
  • Passive
  • Analog

Product safety information may be available here.

AVLGEAR

Santa Fe Springs, CA, United States
Joined Reverb:2016

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Promoted similar listings













Product reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.