IPR2™ 2000 LIGHTWEIGHT POWER AMP

IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

• 2- Channel independent fourth-order Linkwitz-Riley crossovers
• DDT
• Revolutionary IPR class D topology
• Detented input controls
• Speakon output connectors
• Light Weight
• LED illuminated
• Combi XLR 1/4" inputs
• Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
• Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
• Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
• Individual signal pass 1/4" jacks on each channel
• Packed Weight: 10.8 lb (4.9 kg)
• Packed Length: 21" (53.34 cm)
• Packed Width: 12.4" (31.5 cm)
• Packed Height: 4.7" (11.94 cm)

Incredibly Lightweight and Powerful!

Peavey astounds with the IPR2 2000 power amplifier, which is part of the exciting IPR Series. Peavey somehow managed to not only make the IPR Series super-powerful in terms of wattage but also incredibly lightweight, in fact, the lightest in the IPR Series weighs less than seven pounds! The IPR2 2000 features two channels with independent, 100Hz crossovers. Plus, there's a variable-speed fan housed in its lightweight aluminum chassis. In addition to thermal efficiency and reliability, there's also Peavey's DDT speaker-protection circuitry built into the Peavey IPR2 2000.

Peavey IPR2 2000 Power Amplifier at a Glance:

• Groundbreaking IPR Series: Lightweight, efficient, reliable
• Peavey's DDT speaker-protection circuitry suite

Groundbreaking IPR Series: Lightweight, efficient, reliable

The IPR2 2000 is a member of Peavey's impressive IPR Series. Peavey went the extra mile in designing this exciting line of power amplifiers. For starters, each IPR2 Series power amp boasts an extremely light weight; the lightest IPR weighs under seven pounds! Adding to that, Peavey managed to increase output power, reliability, and thermal efficiency, so the IPR2 2000 and all the IPR Series power amps are ready for the most professional of rigs. Each is designed with a resonant switch-mode power supply as well as a high-speed class D topology, yielding incredibly high audio resolution and efficiency.

Peavey's DDT speaker-protection circuitry suite

On top of all-out innovation, the Peavey IPR2 2000 also offers Peavey's exclusive DDT speaker-protection system, with multi-pint clip sampling as well as DC, Temp, Signal, and Active safeguards (all of which are referenced on the front panel via LED indicators).

Peavey IPR2 2000 Power Amplifier Features:

• Groundbreaking IPR Series power amplifier is lightweight, efficient, and reliable
• Built-in Peavey-exclusive DDT circuitry protects your speakers
• High-speed class D topology delivers high resolution
• Variable-speed fan housed inside lightweight aluminum chassis

Peavey IPR2 2000 Power Amplifier Specifications:

• 530W RMS x 2 @ 4 ohms
• 900W RMS x 2 @ 2 ohms
• 2 independent crossovers
• Combi 1/4"/XLR inputs
• Neutrik speakON Combo 1/4" outputs

The Peavey IPR2 2000 power amplifier is lightweight, efficient, and reliable!

Tech Specs

• Number of Channels:2
• Power Class:Class D
• Watts/Side @ 8 ohms:370W
• Watts/Side @ 4 ohms:600W
• Watts/Side @ 2 ohms:1100W
• Inputs:2 x XLR-1/4" combo
• Outputs:2 x SpeakON-1/4" combo, 2 x 1/4" (line thru out)
• Cooling System:Temperature Dependent Variable Speed 80mm Fan
• Filters:Yes
• Rack Spaces:2U
• Height:3.5"
• Depth:10.5"
• Width:19"
• Weight:7.12 lbs.
• Manufacturer Part Number:03609460