Leeky Sim box ,Preamp Simulator Pedal,Power Amp Sim Pedal,Stereo Cab Simulator,price include the import duty to US buyer

The pedalboard-sized SIM BOX simulator seeks to re-create every stage in a traditional amplifier setup â�tube breakup, tone stack, and cabinet simulation â�by using an all-analog, totally silent signal path.This gives players the freedom to the leave the amp and cab at home for remote gigs. Its fully analog preamp, power amp sim, and cabinet emulation dispense a gratifyingly immediate response.

Three amp voicings, each with their own unique gain structure and midrange characteristics, give you cleans and means from both sides of the pond, spanning chunky black-panel American rhythms to roaring British leads. An analog power amp sim and stereo-out analog cab sim put full control of your sound and feel right at your fingertips.As expected, the simulator makes a supreme pedal platform â€â€its balanced input stage and stereo FX return bring your boutique overdrives, stereo delays, and reverbs to life.Factor in a dedicated headphone out and aux in for live monitoring, an FX pass-through for handing off stereo effects to a pair of stageamps, low-noise stereo balanced XLR outs for sending signal to FOH, and a Spread switch that lets you achieve wide faux-stereo effects from mono guitar signals.

Gigging Sweetwater guitarists require guitar amps that are great for accepting pedals, monitoring from the stage, and miking up for FOH reinforcement. The SIM BOX simulator brings these key functions to pedalboard-sized preamplifier that's ready for primetime â�no soundcheck required. Now you have the freedom to leave your amp and cab behind. The simulator 's stereo balanced XLR outputs allow you to send a signal straight to a soundboard or stereo FRFR setup. Meanwhile, an onboard headphone amp lets you monitor yourself directly from your station to dramatically reduce stage bleed and increase isolation.

Jack Function:

1.Input : Connect the guitar or other instrument here.

2.Send : The fx send output is after the preamp amp power amp stages, ready to feed your modulation and ambience effects.

3.return Right (mono): Connect the right (mono) output from your stereo effects here.

4. return Left: Connect the left side of your effects here. If this input is unconnected,the left side will take the signal from the FX Return Right (mono) side.

5.OUT R : If selected"FX",Carries the right side output . If selected"SUM MONO", the Right side will sum both outputs.

6. OUT L : If selected"FX",Carries the left side output . If selected "THRU", the input signal (bypass).

7.XLR Right : Carries the Right side output in a balanced signal.

8.XLR Left : Carries the Left ide output in a balanced signal.

9. Aux In : The auxiliary input receives a signal from an mp3 player,phone, or any audio device.

10.Headphone : Connect your headphones here.

Preamp sim:

 1.Amp model:- Selects between 3 classic amplifiers.

2. AC BRITClassic AC30 sparkly and three-dimensional sound. A true British heritage since t he 60's.

3.AMERICAN:- Classic blackface deluxe sound. Sweet and dynamic with a balanced response.By far the most used amp on studio recordings  

4.MS BRIT: Classic clean-to-crunch vintage plexi style amp. The sound that defined rock music.

5.Gain: Sets the gain of the selected amp model.

6.Level: Sets the preamp master volume level.

7.High: Controls the high frequency band.

8.Mids: Controls the mid band

9.Lows: Controls the low end frequencies.

Power amp sim:

1.PRESENCE: Controls the hi-mids response just like the feedback based presence control on tube amps.Turn it up to cut through the mix or turn it down to sweeten aggressive distortions.

2.RESONANCE: Controls the low-end and resonance peak caused by transformer-speaker interaction in tube amps. Now you can control the dampening factor and get super tight lowend

3.El34: Complex mid response with a compressed feel.

4.6L6: A more open and dynamic response with deeper bass and sparkling highs.

5.Kt88: Similar to 6L6 but with improved lowend range, perfect for bass or 7+ string Guitars.

Stereo cab sim:

1.MIC POSITION: position adjusting the precise amount of high-end roll off you look for.As usual with real mics and speakers, placing the MIC outside the center works best for distorted tones, and cleans sound best near the center.

2.Cab Style Switch:

1x12: Open Back combo with vintage speakers that emphasize the high mids (2-4 Khz), great for cutting through the mix without too much low end mud.

4X12 : Huge sounding resonant low end cabinet with modern speakers,great for rock and heavier tones with sparkly high end, and in-your-face lows.

2x12 : Warm and well rounded open back combo, with rich mids ( 1-3 KHz) and creamy high end.

Other switches and controls

1.SPREAD CONTROL: This unique feature allows you to create a pseudo stereo imaging, by delaying certain frequencies (like a phaser effect). It will make your sound bigger and 3 dimensional, even if you are using a mono configuration.

2.GND LIFT: Disconnects the ground connection from the XLR out. Use in case you are getting hum problems when connecting to an external device.

3.TRS OUTPUTS BYPASS: Each TRS output has a Bypass switch beneath them. You can use them if you want to use a different amplifier in parallel, or use the signal to record the guitar without the effects, for later reamp on the DAW.

Specifications:

Headphone Power: 120mW @ 32 Ohm

Input impedance: 500K ohm

Out impendance:.10K ohm

Weight: 400g

Dimensions:120mmx75mm�0MM(3.93X2.95X2.4inches)

Power Supply: DC IN:9V ~ 15 V, 100 mA