With the latest PCB revision, Lunanoise have added a tree power connector to share the power with another instrument. Lumamix accept voltage from 12 to 20 volts, the voltage present at the rear power in connector, will be shared with the power out connectors, with one power supply you can now power the mixer and other 3 instruments. The new LUMAMIX is the latest addition to the Lumanoise family, a four channel RESONANT mixer with send\return and a resonant equalizer, inspired by the Polymoog resonator section. Lumamix has four jack\mini jack audio inputs, jack\mini jack send\return, the send out is pre the resonant equalizer and the return can be seen as 5- input. The main output is mono jack or stereo mini jack, all the channels go through the resonant equalizer where you can select the type of filter; low pass, band pass, high pass and the frequency range low, medium, high. The equalizer can resonate, the cut-off can be controlled via the Light Dependent Resistor, and the LDR can be activated with the switch. The gain knob sets the level before the equalizer. Lumamix works with 12v 500ma tip+.