MXR Bass D.I.+ Distortion Pedal

M80

The Bass D.I.+ is an incredibly flexible Bass D.I.+ that gives you clean and distortion effects via separate clean and distortion channels. Also has an array of controls to fine-tune your sound and run direct to the PA or straight to the mixing board for pure tone.  Plus an a smart "noise gate" trigger control to eliminate hum and hiss and an optimized EQ helps you find the sweet spot in the mix!.

Description

Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual.

Features

Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4" outputs and a phantom power switch, you'll never have a problem delivering your choice new tones.

Specs

Input Impedance:   2.2 MΩ
Output Impedance

• Unbalanced 150 Ω
• Balanced 300 Ω

Bypass Freq. Response:  +0/-0.5 dB, 20 Hz to 20 kHz

Tone Controls

• Bass ±18 dB, 60 Hz
• Mid ±10 dB, 850 Hz
• Treble ±12 dB, 4 kHz

Noise Floor*

• Bypass -102 dBV
• Clean Effect -98 dBV
• Distortion Effect, Gate Off -94 dBV
• Distortion Effect, Gate On -98 dBV

Volume Control Range:   40 dB
Gate Trigger Range:   28 dB
Sensitivity:   -66 dBV at 1 kHz
Bypass:   Buffered
Current Draw:   9 mA
Power Supply:   9 volts DC

*A-weighted, all controls at mid position