The Litho Boost is based on the classic Pharaoh Amplifiers Class-A Boost pedal. The Class-A Boost was one of the original boutique boost pedals, with hundreds of dedicated users across the world. From time to time, Class-A Boost pedals have made their way back to our shop and we've been floored by just how great they sound! Alexander Pedals started with the tried-and-true Class-A Boost circuit and then did absolutely nothing to it.

Controls:

Volume — Controls the output volume of the boost. Crank it to overdrive your tube amp.

Contour — Set low for transparent and glassy boost. Or set it higher for fat and juicy boost. Your call.

Tone — Adjusts the high frequency content of the boosted signal. The "neutral" setting is around 2 o'clock.

Power Supply:

The Litho Boost requires a 9V DC power supply with a 2.1mm pin, center negative.  The Litho Boost is not designed to be powered on supplies higher than 9V and does not use a battery.  The Litho Boost should work fine on a multi-pedal "daisy chain" connector, but if you encounter excessive noise or hum try a separate power supply.  The Litho Boost requires approx. 12mA.

Please note the bulk of what we sell is MADE IN THE USA and as a result is not subject to tariffs etc. With respect to items that are not Made in the USA, we cover any tariffs on our end.