When you're on stage and can't hear yourself over the drum kit, these FL-10MP floor monitors give you the vocal and instrument clarity you need to stay locked in. The 10-inch woofer handles your vocals and midrange instruments cleanly, while the titanium compression driver cuts through cymbal wash and stage noise to keep your voice present in the mix.

Each cabinet pushes 250 watts RMS with headroom up to 500 watts peak — enough monitor volume for most gigs without the distortion that kills your performance. The 65 Hz to 20 kHz frequency response covers everything from bass guitar fundamentals to vocal harmonics, though you won't get subwoofer-deep bass. At 96 dB sensitivity and 8-ohm impedance, they work efficiently with most power amps you already own.

The angled cabinet design sits naturally on stage floors, and the birch plywood construction handles regular load-ins without falling apart. Dual 1/4-inch inputs plus Speakon connector give you connection options whether you're running from a dedicated monitor amp or splitting power amp channels. Steel handles and carpet finish mean they'll survive the van, the loading dock, and that one drummer who uses everything as a step stool.

These work best in small to medium venues — think coffee shops, clubs, small churches, outdoor stages where you need personal monitoring without overwhelming a 150-person room. They're passive monitors, so you'll need an external amp, but that gives you flexibility to choose your amplification and upgrade later without replacing the entire monitor system.

Bottom line: If you need reliable floor monitors that deliver vocal clarity and handle regular gigging without breaking the bank, these do the job for most live performance situations.

Technical Specifications

• Power (RMS): 250 watts per cabinet
• Power (Peak): 500 watts per cabinet
• Woofer: 10-inch with 60 oz magnet, 2-inch voice coil
• HF Driver: 1.5-inch titanium compression driver, 10 oz magnet, 1⅜-inch throat
• Horn: 4-inch × 10-inch
• Frequency Response: 65 Hz to 20 kHz
• Sensitivity: 96 dB
• Impedance: 8 ohms
• Crossover: 3 kHz, 12/18 dB per octave with tweeter protection
• Inputs: Two ¼-inch, one Speakon
• Cabinet: 7-ply birch plywood with dual ports
• Finish: Black carpet with steel recessed handles
• Dimensions (HWD): 22" × 13" × 15.5"
• Weight: 34 lbs per cabinet
• Warranty: One year
• Recommended For: Stage monitors, live bands, small venues

Frequently Asked Questions

What size amp do I need to drive these monitors?

You'll want a power amplifier with 200-300 watts per channel at 8 ohms. Each cabinet handles 250 watts RMS, so don't underpower them with a weak amp or you'll get distortion when you need volume. Most modern power amps in this range will drive them cleanly.

Can I use these as main PA speakers instead of monitors?

They'll work for intimate acoustic performances or background music, but they're really designed as floor monitors. For full PA use, you'd want to add a subwoofer since their 65 Hz low-frequency limit won't give you the deep bass you need for a complete sound system.

How do these compare to powered monitors?

These are passive, so you need an external amp, but that gives you more flexibility. You can choose your amplification, upgrade later, or power multiple cabinets from one amp. Powered monitors cost more upfront and you're stuck with their built-in amp. If you already own amplification or want to expand your monitor rig, passive usually makes more sense.

Will these work for bass guitar monitoring?

They'll handle bass fundamentals down to 65 Hz, which covers most bass guitar notes, but if you're playing really low tunings or need serious low-end monitoring, you'll want to add a subwoofer. For most bass players, these provide enough clarity to hear your notes and stay in the pocket.