Membrane Switch Pad S-061 for Sequential Circuits Prophet 600

Replacement Membrane Switch Pad S-061 for Sequential Circuits Prophet-600 synthesizer.

You will receive a revised Mk-3 version membrane pad with "Clickable" type switch.
Grey ribbon cable.
MK-1 version of soft switch is available upon request.

____________________________________________________________________________________________

How to remove/install the membrane switch pad

1. Remove 4 screws on the top of both of side panels.
2. Lift control panel up.
3. You will find a ribbon cable. Pull off the ribbon cable from the socket. No tool is needed. 4. Return the control panel. Remove a SPEED knob. Just pulling up.
5. Pry the four corners of the switch pad with a scraper or putty knife and peel it off.
6. Rub the surface of the rest of adhesive with a soft cloth soaked in gasoline or isopropyl alcohol to soften it, and then scrape it with a scraper of a putty knife. It will take one hour +. 7. Clean the surface.
8. Remove the backing paper of the new switch pad, pass the ribbon cable through the slit, and pull it out to the back side. 9. Position it according to the SPEED pot and the display window, and stick it so that the top and bottom are parallel.
10. Insert the end of the ribbon cable to the socket. No tool is needed.
11. Put the SPEED knob as before.
An useful site:  dittomusik.   p600keypadfix.html

USA Buyers:

Customs duties must be paid by the buyer to the carrier upon receipt of the item.
Because of TRUMP’s Tariff Issue, we cannot ship with Japan Post. Will be shipped with FedEx IP.
Please pay customs duties to FedEx. (Tax is collected by Reverb.)
Or shipped with Orange Connex Economy with DDP (duty paid).

Import Duties, Taxes, and Charges are Not Included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.