Shipping to USA with USPS!

Specifications:

  • 2.4G wireless DMX512 R/T
  • 126 channels jumping frequency automatically,high anti-jamming ability,to ensure works reliability
  • 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.        
  • Each other in the same place (Tricolor LED displaying Indicators)
  • Input voltage: 5VDC 500mA MIN
  • Communication distance: 400M (visible distance)
  • Work frequency section: 2.4G ISM, 126 channels, frequency section
  • Max transmitting power rate: 20dBm
  • Receiver Sensitivity: -94dBm
  • CPU: 32-bit ARM Core
  • Modulation: GFSK
  • DMX Signal Interface:RS485
  • Operating temperature: -40 ~ 85 °C
  • Storage Temperature: -65 ~ 150 °C
  • Ambient Relative Humidity: 5 to 95% (non-condensing)
  • Automatic Reboot Trigger: Built-in WDT (watchdog timer)

ID code and LED color corresponding relationship:

1:RED
2:GREEN
3:RED+GREEN
4:BLUE
5:RED+BLUE
6:GREEN+BLUE
7:RED+GREEN+BLUE

  • Press momentary switch above the side led indicator to indicate ID setting
  • Press again to set IC,to the color ID desired,adding 1 each time you press the switch will advance the color ID code.
  • Working condition: LED constant lit up:No DMX or wireless signal.

                          Red LED flash:Transmitting Green LED flash:receiving

  • RF frequency 2.400 - 2.525G,total 126 channels,it’s searching automatically,
  • ID Code “1-7” groups ID code,press ‘KEY’ for setting,it only can work under same ID code of transmitter and receiver. (Same LED Color)
    Establishing Communication:

    1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
    2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
    3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash morefast once DMX data more fast.
    4. Communication was established correctly.

    Please note some DMX fixtures need to be placed into slave mode for proper DMX control. If in the master mode they will send a DMX signal out the xlr jacks causing the auto scan transmitter/receivers to go into a transmitter mode due to the dmx signal being present.



    Questo articolo è venduto "Come da descrizione”

    Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.

    Annunci simili in promozione













    CondizioneNuovo (Nuovo)
    Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più
    Marchio
    Modello
    • DMX512
    Finish
    • Black
    Categorie
    Anno
    • 2020

    Le informazioni sulla sicurezza del prodotto sono disponibili qui.

    Informazioni sul venditore

    Gear Up, Cover Up

    Sofia, Bulgaria
    Iscrizione a Reverb::2019

    Protezione di Reverb

    Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

    Scopri di più

    Checkout sicuro

    Reverb Gives

    Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

    Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.