Tribute Telecaster Control Plate 5-Way SHOoP

*All my control plates come with mounting screws and a hardwired bridge ground.

This harness/control plate for Telecasters gives you five cool tones from your two pickups. Besides neck only and bridge only, you get three different ways of combining the two pickups! The specifics are as follows:
1. Bridge
2. Neck and Bridge in Parallel Half Out of Phase
3. Neck and Bridge in Parallel
4. Neck and Bridge in Series
5. Neck

SHOoP stands for Series and Half Out of Phase, the two extra tones you get out of your Tele with this harness.

Components include 2 CTS dish-back 250K pots, 2 Allen-Bradley 6.2K Ohm resistors, 2 PIO Russian Mil Spec Caps (.047MFD and .01MFD) a Toneshapers 5-way Superswitch and a Pure Tone output jack, all wired up with Gavitt cloth-covered wire and Thackery silver solder for clear, crisp connections throughout.

Please note that, as in all harnesses that run your pickups in series, the neck pickup must be modded with a third ground wire before installation. If you aren't comfortable making this mod I would be happy to do it for you at no charge. Just send me your neck pickup and I will return it with your harness all ready to go!

Thanks for looking. Please check my feedback and make your purchase with complete confidence. All questions will be answered promptly and courteously.
ROCK ON!!