élite series - EF10P
10-inch / 3-inch - 600 watts
The next generation of élite series speakers are here.
2 Year Unconditional, No-Fault Warranty (Yorkville will repair or replace it - even if YOU BREAK IT!). 10 Years Warranty on the Wooden Enclosure
600 watts - powered - 1/10" & 3” HF driver on 60°x 40° horn – Dedicated FOH Cabinet
w/flying Hardware, built in mixer, and iOS and Android APP for remote control of DSP settings
Features
- High Output, High Quality and extremely durable
- Dedicated Front of House box
- Completely Redesigned Next Generation Elite Cabinet
- ABS Coated Birch Plywood Cabinet Construction
- Multiband DSP Limiting with 4 Preset Performance Modes
- 3-inch Titanium Diaphragm Compression Drivers for Reduced Distortion at High SPL
- 10-inch Long Excursion Cast Frame Neodymium Woofer with 3-inch Voicecoil
- iOS and Android App for Added Cabinet Control (Coming Soon)
- Made in Canada
- System Type: 2-Way
- Active or Passive: Active
- Program Power (Watts): 600 Watts (1200 Watts Peak)
- Max SPL (dB): 129dB Peak (123dB Continuous)
- Frequency Response (Hz +/- 3dB): 48 - 20k (Hz +/- 3dB)
- Crossover Frequency (Hz): 1400
- Driver Configuration: LF - 10-inch, HF - 1.5-inch Diaphragm
- HF Driver(s): 1.5 Inch Voicecoil (Titanium Diaphragm)
- HF Dispersion (°H x °V): 90x30
- LF Driver(s): 10-inch neo magnet w/2.5-inch Voice coil
- HF Power Amplifier (Watts): 100
- HF Amplifier Type 2-Tier High Headroom
- LF Power Amplifier (Watts): 500
- LF Amplifier Type: Class-D
- Power Cable: 25 ft (7.6m) Heavy Gauge Detachable IEC
- In / Out Connection: 1 x XLR & 1/4-inch Combi-jack, 1/8" Line Inputs
- 1 x XLR microphone Input
- 1 x XLR & 1/4-inch Combi-jack Main Input
- 1 x XLR-M Thruput
- Input Impedance Bal/UnBal): 95KOhms / 90kOhms
- Input Sensitivity (Vrms Sine) : +4dBv / 1.23V
- Controls Mixer Enable
- Mic Input w/level
- Line Input w/level
- DSP Mode (Club, Concert, Vocal, Custom)
- Sub: (100Hz HP Filter)
- Bluetooth Control Enable
- Master Level
- Bar Handles: 1 x Side / 1 x Top
- Flypoints: 8 x ¼-20 (2 Top, 2 Bottom, 2 Each Side) + 1 Pullback (Back)
- Pole Mount Adapter (1 3/8"-3.5cm): 1 Bottom (1 3/8-inch / 3.5cm)
- Enclosure Materials: ABS Coated Baltic Birch Plywood
- Dimensions (DWH xbackW, inches): 13 x 13.7 x 20 x (Back Width) 11.1
- Dimensions (DWH xbackW, cm): 33 x 34.8 x 50.8 x (Back Width) 28.2
- Weight: (lbs/kg) 43 / 19.5
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Categories | |
| Made In |
|
Product safety information may be available here.






