Black Mountain x Third Man Hardware ROTO TREM standard
The Roto Trem is a square-wave chop tremolo that turns your guitar signal on and off in a hard rhythmic pattern. The speed is controlled with the wheel ranging form about 1 second per cycle to approximately 60 ms per cycle.
CONTROLS:
- Speed Wheel: Sets the tremolo rate from slow chop at 0 to fast pulse at 10.
- Effect On/Off Foot switch: Toggles the tremolo effect on and off.
- Momentary Foot switch: Engages or disengages the effect only while pressed. Release the foot switch to return to the previous state.
- Output Trimmer: A side-mounted trimmer adjusts the output volume of the effect.
POWER:
- Use a standard 9V DC, 0.1A or higher, center-negative power supply with a 2.1 mm barrel connector.
OPERATION:
- Connect your instrument to the input and your amplifier or next pedal to the output.
- Plug in a 9V DC center-negative adapter.
- Set the speed wheel to the desired chop rate.
- Press the effect foot switch to engage or bypass the tremolo.
- Press and hold the momentary foot switch for temporary chop bursts or stutter-style effects, or to temporarily bypass the effect if already engaged.
- Adjust the output trimmer on the side to match your bypass level or set a slight volume lift.
LED BEHAVIOR
- The dual front-panel LEDs flash in sync with the tremolo rate.
For any issues with your Roto Trem, please reach out to
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Zustand | Neuwertig (Gebraucht) Neuwertige Artikel sind generell in fast neuem Zustand, aber wurden geöffnet oder gespielt bzw. benutzt.Weitere Informationen |
|---|---|
| Marke | |
| Modell |
|
| Farbe |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
| Pedalformat |
|
| Farbfamilie |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.


