Genelec 4435A Smart IP 2-Way In-Ceiling Speaker (White Square Grille)

Overview

The Genelec 4435A is a 2-way Smart IP in-ceiling speaker for fixed installations. One CAT cable supplies PoE+ or PoE power, Dante or AES67 audio and control, and a balanced Euroblock input accepts analogue line audio as well. A 5 in woofer and a 3/4 in metal dome tweeter each run from a 50 W Class D amplifier, giving 104 dB short-term SPL and a 58 Hz to 39 kHz response (-6 dB). Three latches clamp the enclosure to the ceiling board and the grille attaches with magnets. The 4435A replaces Genelec's AIC25 analogue in-ceiling model and is made in Finland.

Key Features

• Single-cable install: PoE+ or PoE power, audio-over-IP and management share one CAT cable up to 100 m long.
• Dante and AES67 input: Plays Dante and AES67 streams at 32 to 96 kHz and 16 to 24 bit, using one channel or the sum of two.
• Analogue line input: 3-pin balanced Euroblock at 10 kOhm. Typically 10 to 20 speakers can share one balanced line output.
• Stored power for peaks: The internal power supply stores energy for audio peaks and reaches 104 dB short-term SPL at 1 m on PoE+.
• Built-in room correction: 20 parametric filters, delay up to 98 ms and level alignment, set in Smart IP Manager and stored in the speaker.
• Latch installation: Three mounting latches are tightened from the front baffle. A cut-out template is included and a tab on top takes a safety wire (sold separately).
• Magnetic grilles: Low-profile round or square grilles in black or white. The metal mesh grille can be spray painted to match the ceiling.
• Wide coverage: 120 degrees horizontal and 100 degrees vertical dispersion.
• Control: Smart IP Manager for setup, the Smart IP Controller app for iOS and Android, and a public API for automation systems.

Specifications

• Type: 2-way active Smart IP in-ceiling speaker
• Woofer: 130 mm (5 in) cone
• Tweeter: 19 mm (3/4 in) metal dome
• Amplifiers: 50 W bass + 50 W treble, Class D (short-term)
• Frequency response (±2.5 dB): 70 Hz - 20 kHz
• Low / high cutoff (-6 dB): 58 Hz / 39 kHz
• Max short-term SPL (1 m, PoE+): ≥104 dB
• Max long-term SPL (1 m, PoE+): ≥96 dB
• Max peak SPL (1 m, PoE+): ≥107 dB
• Self-generated noise (1 m, A-weighted): ≤10 dB
• Dispersion (H x V): 120° x 100°
• Crossover: 2.9 kHz
• Latency, analogue input to acoustic output: 2.2 ms
• Network / audio input: 1 x RJ45, 100BASE-TX
• Audio-over-IP formats: Dante, AES67
• Analogue input: 3-pin Euroblock, balanced, 10 kOhm
• Analogue input level for 100 dB SPL at 1 m: -6 dBu
• Max analogue input: 24 dBu
• Room EQ: 20 parametric filters, sensitivity -60 to 0 dB, delay 0 - 98 ms
• Power: PoE+ (IEEE 802.3at) or PoE (IEEE 802.3af)
• Power consumption: Idle 5 W, ISS standby 4 W
• Max CAT cable length: 100 m (333 ft)
• Minimum installation depth: 162 mm (6 3/8 in)
• Weight: 3.5 kg (7.7 lb)
• Grille: Square, white
• Dimensions: 288 x 288 x 159 mm
• Grille protrusion from ceiling: 7 mm (1/4 in)
• Genelec order code: 4435AWS

In the Box

• 4435A Smart IP in-ceiling loudspeaker
• Cut-out template
• Euroblock connector for analogue audio
• White square grille (magnetic)
• Operating manual