MUTE KILL SWITCH tuner send guitar popless silent switch pedal chain amp signal control

MUTE/KILL SWITCH & TUNER SEND

A SIMPLE MASTER CONTROL SWITCH TO END ANY PEDAL CHAIN,

THIS SIMPLE DEVICE WILL MUTE THE SIGNAL, ELIMINATING NOISE DURING TUNING OR WHILST EQUIPMENT IS ON STANDBY READY TO GIG.

WHEN 'ACTIVATED', THE OUTPUT IS MUTED AND THE SIGNAL REDIRECTED TO THE TUNER SEND; GREAT IF YOU ARE A TRUE BYPASS FAN AND WANT THAT BUFFERED TUNER OUT OF THE WAY.

THE (RIGHT) 'STAB' FOOTSWITCH IS NON-LATCHING AND CAN BE USED TO CREATE MANUAL TREMOLO & GLITCHING EFFECTS. WHEN THE (LEFT) LATCHING ‘MUTE' SWITCH IS PRESSED, THE SIGNAL IS MUTED AND THE ‘STAB' SWITCH WILL MOMENTARILY 'ALLOW' THE SIGNAL THROUGH. CONVERSELY, WHILST THE LATCHING 'MUTE' IS DEACTIVATED/UNMUTED, THE 'STAB' WILL MOMENTARILY MUTE.

BEST PLACED BEFORE AMBIENCE EFFECTS TO PRESERVE TAILS.

SPECIFICATION & FEATURES:

- ‘HOLD’ LATCHING MUTE/UNMUTE BUTTON.

- ‘STAB’ NON-LATCHING/TEMPORARY MUTE/ UNMUTE BUTTON FOR MANUAL TREMOLO/ GLITCH EFFECT.

- TUNER SEND ACTIVE WHEN LATCHING ‘HOLD’ BUTTON IS PRESSED.

- TUNER SEND CAN ALSO SERVE AS AN A/B SELECTOR OPTION.

- COMPLETELY PASSIVE/TRUE BYPASS SWITCHING WITH ZERO EFFECT ON TONE.

- SUITABLE TO USE WITH ANY INSTRUMENT OR DEVICE THAT CAN BE CONNECTED VIA 1/4"/6.35MM JACK CABLE.

- POPLESS SWITCHING.

- L.E.D INDICATOR POWERED BY STANDARD 9-18V DC (NEGATIVE CENTER).

- STANDARD 2.1MM POWER SOCKET FOR REGULAR PEDAL POWER SUPPLIES & DAISY-CHAINS. (BATTERY IS DISCONNECTED WHEN POWER JACK IS INSERTED). POWER IS FOR L.E.D.S ONLY.

- CURRENT DRAW (APPROX): <0.5MA

- BATTERY CLIP OPTION INSIDE (POWER SAVING WHEN INPUT JACK IS ABSENT).

- SATIN VINTAGE-STYLE ACRYLIC FINISH.

- VINTAGE STYLE AMBER LED INDICATOR.

- ROBUST & COMPACT DIE-CAST ALUMINIUM CHASSIS.

- FULLY SHIELDED UNIT TO ELIMINATE INTERFERENCE AND NOISE.

PLEASE NOTE: IN THE INTEREST OF CONSTANTLY DEVELOPING & IMPROVING OUR PRODUCTS, APPEARANCE, DESIGNS & FEATURES MAY CHANGE WITHOUT NOTICE.

CREBERINSTRUMENTS.COM
Our designs have taken inspiration from the original effects that produced the most iconic sounds of the 1950s, 60s and 70s. However, our devices are far from replicas; we use absolutely no pre-made or printed circuit boards, and all circuits are our own unique design. All Creber Instruments effect pedals are designed and calibrated to produce the absolute best studio-quality tones, with the robustness required to withstand even the heaviest-footed gigging musician. All components are soldered by hand using modern high precision & quality, low-noise analog components. We have dedicated years to calibrating our designs to achieve the best sound with greater stability, compatibility and reliability. Our chassis graphics are clear and simple, with no unnecessarily fancy artwork or gimmicky terminology; unless it improves the quality of sound, we like to keep it concise and to the point, just as it was in the good old 50s & 60s. These pedals are built primarily for guitar though, as with all things musical, there are no rules, so all of our effects work well with any instrument that can be connected with a ¼ inch jack - but let your ears decide!

All C.I. effect pedals are built upon order, hand made one at a time. Please allow up to 12 working days manufacturing time, PLUS (variable) shipping time.

All C.I. products include Free World-Wide Delivery, a 30 Day Satisfaction Guarantee and a One-Year Warranty.

THANK YOU FOR YOUR INTEREST! 

FOR MORE INFO, VISIT: CREBERINSTRUMENTS.COM