B-STOCK Ludwig Classic Maple 4pc Drum Kit - "Sable Classic Coat"

B-STOCK Ludwig Classic Maple 4pc Drum Kit - "Sable Classic Coat"

Sizes (Depth x Diameter):

- 7x10
- 8x12
- 16x16
- 16x22

Features:

- Small classic lugs on the rack toms
- Large classic lugs on the floor and bass drum
- Virgin bass drum
- Elite spurs
- Keystone badges
- Direct to shell triad brackets throughout

This kit is listed as B-stock due to some paint overspray on a few of the bearing edges.

Proudly made in Monroe, North Carolina, Ludwig takes great care in selecting only the finest quality materials for Classic Maple drums.

This process starts with select North American maple. The maple is cut into panels. The outside panel is 1.8mm thick, two-ply, cross laminated maple. Cross-lamination is the process in which the panels are made of two glued plies of wood, with the grain direction of one-ply at 90 degrees in relation to the grain direction of the adjacent ply. The outside grain runs circumferentially with the shell.

The center panel is 2.4 mm thick, three-ply, cross-laminated maple. The middle ply runs circumferential with the shell, and the outer plies are at 90 degrees. The inside panel is 1.8mm thick, two-ply, cross laminated maple. The inside grain runs circumferentially with the shell. This gives the 7-ply shells a total thickness of 6mm.

The bearing edges are cut to a 45-degree angle within 1/16" from the outside edge. The sharp edges are rounded by light sanding for a smooth even surface. This process results in what is the unmistakable signature Ludwig sound.

Note:

Like most of our other kits for sale, this is a new kit that has been removed from it's original boxes and set up for display in our physical store. There is a possibility that this kit has been played in our store and may exhibit small signs of wear. Please contact us directly for a full description of its condition.