Up for grabs is a used (for parts / for repair) Keeley C2 2 Knob Compressor (MISSING True-Bypass Switch and wires need to be re-attached, extra wires included). From mid 2000s (the date is written on the under-side of the casing - but I can't make out the last digit of the year - it's looks like it's either 2004 or 2006).

As Is / NO Returns.

• This pedal was working before the wires were unattached and before the true bypass switch was taken off.
• BUT - I'm note sure whether or not it will properly function when it is put back together. It might or it might not.
• Please ask questions first. If necessary - I can sell the parts that you need (please message me to arrange this).

Serial Number on the outer area of the bottom plate is A7344

CASING: Silver with black graphic // Inside Components - different colors.

Black square rubber FEET are included (sorry not pictured).

===

Original issue was that one of black wired unattached,. I had trouble figuring out where the wire connected to on one end. I know where is was originally connected to on the circuit board and I believe that the other end of this black wire attached to the OUT jack - but I don't remember where exactly it goes on the OUT jack.

And then as I was handing pedal's inside components a couple more wired unattached. When I tried to resolder a few of the wires - the insulated melted.

And then a few of the metal legs of the true by pass switch came off (so completely took off the switch - the switch is NOT included).

NOTE SURE if two areas on the circuit board are still OK to re-attached / resolder the two unattached wires. I did not reattach / resolder there two wires. But the holes are open for you put the metal part of the wire through the hole to resolder these two wires.

===

I've provided a reference picture of the same model / version Keeley C2 pedal- but it is not the actual pedal for sale. Hopefully this pictures can guide you to where the wires attach.

NOTE: The original KEELEY have a kind of delicate insulation covering (easily melts). So I've provided other / extra wires (the wires are long -so you can cut them to your desired length). The wires are most likely more than you'll need for this pedal. So you can use remaining wires the for other pedal (or guitar) projects.

===

The casing is in used / pre-owned condition and has several cosmetic imperfections.

NOTE: When looking at the bottom side of the casing - the lower left screw hole has a broken screw (part of the threaded piece) . SEE last picture. You can't see in in the pictures - but this small metal piece is in the hole it's is there). All four screws are included.

Later I'll be adding more written details about it's condition - for now please refer to the pictures.

I took pictures of all sides of the pedal.  There are several pics of the inside of the pedal. And there are a few pics of areas of interest, and Feel free to ask for more pictures.

NOTE:   There may be some imperfections that I overlooked.   There are some imperfections that can be seen in person that do not appear in the pictures.  Also  - some imperfections show up in the pictures that are not visible in person.

----

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA shipping is usually with USPS (with tracking)
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.