The micro.clock Gen 4 shrinks our advanced MIDI timing technology into a tiny package – just 3.6″ x 1.5″ x 1.6″ (93 x 38 x 42mm.)

Tap the footswitch to set the master clock tempo.  The micro.clock will then send taps to your devices to lock them in to your music.

Selectable subdivisions let you tap in quarter-notes and set your devices to whole, half, quarter, dotted 8th, 8th, quarter- and 8th-note triplets, 16th notes, and even the “Golden Ratio!”

Bright OLED display shows your tempo in BPM or milliseconds, preset name, and setup information.

User-selectable footswitch modes allow you to make the micro.clock Gen4 work the way you want. Tap the footswitch to set the tempo, start / stop the clock, or change presets quickly on the fly.

Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the three outputs.  You can also set the micro.clock to send a MIDI Program Change to an external MIDI device.

Have a pedal that needs an odd or unusual configuration for tempo control?  The micro.clock works with devices that accept a normally-open or normally-closed footswitch, and can even send 0-3.3V control voltage that works with some pedals with expression control of delay / tempo.  Check with your pedal builder for details on their expression options!

Want to configure using your computer instead of on-device? No problem! We have a convenient web-based editor to customize every setting on the controller.

Features

Bright OLED display shows tempo in Beats Per Minute or milliseconds.

Three (3) optically-isolated tap tempo outputs with selectable tap divisions for each

Each output may be used as MIDI output (TRS type A or type B)

MultiJack output also functions as tap tempo input, Control Voltage Output, or additional MIDI output (requires adaptor cables.)

MIDI Clock outputs synchronizes a connected MIDI device

Internal DIP switches to customize each output.

Up to 99 user-accessible presets.

Sends tap signals and clock from 30-400 beats per minute.

USB Type C for firmware updates and MIDI input / output

Connect directly to USB HOST of other Disaster Area Gen4 controllers for tempo insert

Available subdivisions include Whole, Half, Quarter Triplet, Quarter, Dotted Eighth, Eighth Triplet, Eighth, and Sixteenth notes, as well as “Golden Ration” = PHI.

Runs on standard 9V power, 60mA minimum or 5V from USB Type C

All items will be shipped with insurance, and most items (typically $100 and up) will require a signature. Please see the photos for exact condition and send us a message with any questions!