Plug & Play Headshell, Audio Technica AT91R Cartridge + Stylus For Akai AP-002, AP-003, AP-004, AP-004X, AP-005, AP-006, AP-100C, AP-101C, AP-103C, AP-206C, AP-207, AP-306C, AP-307, AP-D30C, AP-D33, AP-D210, AP-Q50, AP-Q55 Vinyl Record Players Turntables

It is Suitable For & Will Fit the Following: Akai AP-002, AP-003, AP-004, AP-004X, AP-005, AP-006, AP-100C, AP-101C, AP-103C, AP-206C, AP-207, AP-306C, AP-307, AP-D30C, AP-D33, AP-D210, AP-Q50, AP-Q55
Vinyl Record Players Turntables.

Product Information Below:

It Comes Pre Fitted with a Quality High Output Audio Technica AT91R Moving Magnetic Stereo Cartridge & Matching Stylus.

The AT91R is a logical improvement of the popular AT91 phono cartridge, featuring an Aluminium Cantilever used on higher performance Cartridges offers a product presenting excellent value for money.

Features include Dual V Mount magnet design and Conical Diamond Stylus. 

The dual V Mount magnet configuration delivers excellent channel separation and low distortion resulting in outstanding tonal quality. 

As with all the AT90 Series cartridges the AT91R features ½” geometry and can be mounted on virtually any Tonearm or Headshell.

Headshell Information Below: 

The Replacement SME Style H-4 Bayonet Fitting Headshells that we Selling are Precision Manufactured to Very High Standards to ensure that Their Performance Matches that of the Original Headshells that they are Replacing as closely as is Possible.

Detailed Product Information Below.

Type: SME Type H-4 Bayonet Fitting 4-Point Connector.

The Headshell is Wired with Litz 5N Pure Silver Wiring.

Litz Wiring: 5N Pure Silver Litz Wiring is the Best Wire for Faster Transmission Speeds and Cleaner Sound.

It's 0.55mm Outer Diameter, Litz Construction, 7 Strands and Each Strand is 0.1mm in Diameter, its 99.999 % Pure Soft Annealed Silver Wires in oversized PTFE Teflon Insulation. 
Woven Teflon Litz Construction is ideal, it Transmits Electrical Signals faster and with far Less Distortion than Ordinary OFC Wires.

High Grade Teflon Insulation is the best insulator for bare cable. 
Wire Length: 2 inches (50mm) Long with Female Connector Sockets on Each End.

The Cartridge Connector Terminals are made from High Quality Sn-P Bronze with High Conductivity 24K GOLD Plating. Each Terminal End is Wrapped in Colour Coded Shrink Tubing. Terminals are Hand Soldered.

Colour Coded heat shrink is used at the cartridge end,  Black Heat Shrink is Used at the Headshell End.

It is Recommended to Adjust the Tracking Weight on Your Tonearm after Fitting a New Headshell.

If your Tonearm has a Bias Adjustment, Check & Reset that as well.

Free UK Shipping: Orders normally arrive in 2 - 3 days (Monday to Friday)