HK Audio Digital Processor - DSM2060 Digital LS-Management-System

HK Audio DSM 2060 Digital LS-Management-System

Digital processor, configurable via software and on device, 24-bit/96 kHz converter, 2x XLR In to 6x XLR Out

Product Details  

The HK AUDIO® DSM 2060 Digital Speaker Management System is a digital controller rich in practical features for both touring and fixed installations. With its innovative HFT™ Hardman Filter Technology, it exceeds standard requirements and offers the kind of high-end audio quality that until now could only be obtained from considerably higher priced units. The HK AUDIO® DSM 2060 system incorporates high-end 24-bit, 96-kHz converters that ensure extremely accurate and natural digital signal processing and a frequency response up to 40 kHz.

The two inputs and six outputs can be configured separately for front-of-house and monitor use in touring applications, and likewise allow for a great deal of flexibility in fixed installation projects. To best meet the needs of any given venue, you can apply as many as six parametric EQs plus two shelving filters to each input and output channel. To facilitate setup of delay zones and time alignment of loudspeaker components in multiamped systems, the DMS 2060 offers input delays up to 400 ms and output delays up to 80 ms. For greater speaker and driver protection different limiters can be applied to each output in steps as fine as 0.2 dB. Attack and release times of these limiters are optimally preconfigured. At the heart of the controller is a comprehensive set of crossover types, including Butterworth, Bessel, and Linkwitz-Riley, with selectable slopes from 6 to 24 dB.

Unique to the HK AUDIO® DSM 2060 are the fourth-order and eighth-order HFT™ filters that create crossover slopes of 36 dB and 52 dB. But unlike other steeply sloped filters, the HFT™ crossover achieves absolutely minimal phase shift and group delay, even at maximum slopes, thereby maintaining an extraordinarily natural-sounding signal. As a result, HFT™ produces exceptionally smooth response in the crossover region and faster roll-off rates, which in turn minimise distortion, permit lower crossover frequencies and safely expand the effective frequency range of the drivers. This technology allows you to take maximum advantage of your sound system's headroom and increase its operational reliability at the same time.

Product Features

•    Output impedance: 35 ohms, balanced to ground
•    Frequency response: 10 Hz – 40 KHz, +/- 3 dB
•    Limiters: High-performance limiter, threshold adjustable in 0.2 dB steps
•    Delay: Input 400 ms, Output 80 ms

Specifications

•    Model DSM 2060
•    Top of the line digital speaker management system
•    Frequency response +/- 3 dB 10 Hz - 40 kHz, +/- 3 dB
•    Tickets 2x In
•    6x output outputs
•    Type IIR filter
•    Maximum input dynamics (dBu) > 112 dB (A-weighted), 22 kHz bandwidth
•    Internal bit depth 24 bits
•    Sampling rate 96 kHz
•    AES 3 protocol (AES/EBU)
•    Delay 400ms ON, 80ms OUT
•    Network 38.4 kBaud, Format: 8 Data, 1 Stop, no parity
•    Max. input level +20 dBu
•    Max. output level +22 dBu 600 Ohm
•    Input impedance 9 kOhm
•    Output impedance 35 ohms
•    Power consumption 40 VA
•    Mains voltage / frequency 100- 240 V / 50- 60 Hz

Weight and dimensions including packaging

Weight (incl. packaging) : 3.0 kg
Dimensions (incl. packaging) : 60.0 x 30.0 x 10.0 cm

Rear connections and front plate