Lab Gruppen FP 10000Q Power Amp

Operating voltage, 230 V / 115 V nominal 3

130-265 V / 65 -135 V

Minimum power-up voltage, 230 V / 115 V

171 V / 85 V

10,000W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring Applications

Product Features 

• 10,000 Watt, 4-channel amplifier with up to 2,500 Watts output per channel and NomadLink network for monitoring and control
• Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
• 4 x 2,500 Watts into 2 Ohms, 4 x 2,100 Watts into 4 Ohms, 4 x 1,300 Watts into 8 Ohms, 4 x 660 Watts into 16 Ohm
• Proven and reliable Class-TD output stage delivers Class A/B audio quality with Class D efficiency
• Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
• Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
• Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
• Efficient Intercooler copper cooling system dissipates more heat for extended peak output
• 4 x balanced analog audio inputs on Neutrik XLR* connectors
• 4 NL4 Neutrik speakON* output connectors
• Removable dust filter grilles for increased air circulation
• Rugged 2U rackmount chassis for durability in touring applications
• Designed and engineered in Sweden

Our Biggest Selling Touring-Grade Amplifier, Delivering Rock-Solid Reliability and Sonic Purity

The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is the now proven technological milestone that is LAB GRUPPEN’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q.

Network Control

The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. NB. operation of NomadLink requires the NLB 60E NomadLink Bridge & Network Controller which must be purchased separately.

Proven Ergonomics

View all key performance parameters at a glance – in real time – on the comprehensive front panel display. The FP+ provides the most complete and useful front panel indication on the market today. Bright, color-coded LEDs give clear status indication of all control activation, warnings and faults – without scrolling through menus. Conditions such as blown drivers, shorted lines, and over-temperature channels are easily recognizable. You won’t waste time trying to decipher a generic “trouble light.”

pecificationShow moreGeneralNumber of amplifier channels

2

Peak total output all channels driven

14000 W

Peak output voltage per channel

195 V

Max output current per channel

90 A peak

Max output power (all channels driven)2 ohms

7000 W

4 ohms

4400 W

8 ohms

2350 W

16 ohms

1200 W

Max output power bridged2 ohms

Not recommended 1

4 ohms

14000 W

8 ohms

8800 W

16 ohms

4700 W

PerformanceTHD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Input impedance

20 kOhm

Output impedance @ 100 Hz

19 mOhm

Gain, Sensitivity and LimitersVPL, selectable per ch

195, 170, 140, 116, 100, 80, 66, 54 V

VPL, when bridged 2

390, 340, 280, 232, 200, 160, 132, 108 V

Voltage Peak Limiter mode (per ch.)

Hard / Soft

Amplifier gain selectable (all channels) – rear-panel switches 2

23, 26, 29, 32, 35, 38, 41, 44 dB

Default gain

38 dB

Level adjustment (per channel)

Front-panel potentiometer, 31 position detented from -inf to

Connectors and ButtonsInput connectors (per ch.)

3-pin XLR, electronically balanced

Output connectors (per ch.)

Binding post

Output bridge mode

A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source

NomadLink network

On board, 2 x RJ45 connectors IN and OUT

Intelligent fans (on/off)

Yes, depending on presence of output signal

Power on/off and Remote enable on/off

Individual switches on front-panel

Cooling

Dual fan, front to rear airflow, no filter required, temperature controlled speed

Front-panel user interfaceCommon

NomadLink Network; Power Average Limiter (PAL)4; Power on

Per channel

Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power

Operating voltage, 230 V / 115 V nominal 3

130-265 V / 65 -135 V

Minimum power-up voltage, 230 V / 115 V

171 V / 85 V

Power Average Limiter (PAL) 4

Yes

Soft-start / Inrush Current Draw

Yes / max. 5 A

Mains connector

230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

DimensionsDimensions

W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)

WeightWeight

12 kg (26.4 lbs)

FinishFinish

Black painted steel chassis with black painted steel / aluminum front

ApprovalsApprovals

CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC