1969 Marshall JMP 1930 Popular 2x10 mini Blues Breaker 10w

Very rare combo amplifier with 1 x 12-inch or 2 x 10-inch Celestion speakers. Two channels, each with two inputs and separate tone and volume controls for each channel. A tube generated tremolo operates on all four inputs with intensity and speed controls. A tremolo on/off footswitch completes the package. The tube complement is a pair of ECL86 triode/pentode tubes for the push-pull ouput stage and phase-inverter stage, and a single 12AX7/ECC83 for the preamp. One half of the 12AX7 is used as an oscillator for the tremolo, so that leaves only a single gain stage in the preamp. It combines a pentode power tube, with 9 watts anode/plate dissipation rating, so think of it as similar to the well known 6BQ5/EL84 but with lower power ratings, plus a triode similar to one half of a 12AX7/ECC83, both in the same glass envelope, with the standard miniature 9-pin base. A pair of the these tubes can theoretically achieve an audio output of up to 14 watts, in class-AB/cathode-bias operating conditions.A classic Marshall tone, forthrightness, presence and sheen. It does so in a 2 x 10 combo that you will love to record with in the studio. this amp is a UK EU model so 110-250 VOLTS. The amp is fully original and still houses its original transformers, footswitch, cabinet, panel, handle, knobs ! etc etc. This amp puts out 10 watts of all British valve power this amp is a UK EU model so 110-250 VOLTS. The amp is fully original and still houses its original transformers, footswitch, cabinet, panel.The amp is working normally as it should straight from the factory which means it has the noisy circuit that hums and hisses. These amps left the factory as such and they are well know for this (now all original but a simple service with some adjustments will rectify that!).Original 2 x 10" Pre-Rola matched Celestion Speakers with Pulsonic Codes in excellent shape with nop rips, voice coil rubs etc. Original footswitch