2 lite use genuine Boss INPUT jacks (for compact sized pedals) +nuts,washers,wires (+3 extra wires & 2 zip ties) BOTH jacks have brown,gray,yellow wires attached, work fine, from 2000s (can be used on most other year Boss pedals) NO: pedal(s), other parts

Up for grabs are: TWO lightly used genuine Boss INPUT jacks (for compact sized pedals) + nuts, washers, and wires [+ three extra wires & two zip ties]. NO pedal / NO other parts.

• $1 less if you don't need the three extra wires (please make an offer with a message).
• Please let me know if you only need ONE INPUT Jack with the connected three wires + nut & washers - make an offer with a message.

Specifically from 2000s (can be used on most other year Boss pedals). Sorry I don't remember what model Boss pedals these jacks (+ nut, washers, & wires) came off of. And I don't remember the exact year (in the 2000s) that they are from.

BOTH jacks have brown, gray, yellow wires attached to them.

These jacks function fine.

==

NOTE: Please let me know if you prefer ONE INPUT jack and ONE OUTPUT jack - I can create a new listing. Also - please let me know if you prefer TWO OUTPUT jacks - I can create a new listing.

==

Back to details about what's for sale in the listing that you are looking at now:

The OUTER BLACK areas of each INPUT jack: Both have two very short dash (on the same side) - so I'm not sure if this if from how they were made or from how they were placed on the pedals). They also have other tiny nicks, light surface cloudiness, and / or a few small shiny spots / lines from how they were placed on the pedals they were from (NO pedal included), from age, and / or from handling.

The metal threaded parts of each INPUT jack are fine. The outer round edge of each INPUT jack have a few very tiny nicks.

The inner metal areas (that can be seen in the slots of the Black plastic part of the jacks):

• For one of the the INPUT jacks - there minor surface cloudiness.
• For the other INPUT jack - there are a couple of tiny & very small rust spots (nothing too serious).

The nuts, washers, and locking washers ware mostly very clean with a few minor imperfections.

WIRES (read specific details about the WIRES after the next section):

TIP: If a wire or wires is / are soldered on good - but needs more length - instead of taking the wire(s) off of the jack [or in a different situation - instead of taking the wire(s) off or the circuit board, etc)] - make a connection with electrical heat shrink tubing. Leave some of the existing wire(s) on, slide on the heat shrink on the wire, and connect to the new wire(s) - by twisting old new together, add a little bit of solder (for a secure connection), move the heat shrink tubing over the newly connected area, and gently heat (instead of a heat gun - you can use a soldering iron to heat to tubing).

The BROWN, GRAY, and YELLOW wires for both jacks are connected to / soldered on to connections fine - but still handle these items carefully.

The wires are mostly fine - they just have some light - but visible - bends (like wavy-ness) and very light - but visible surface markings / discoloration..

Length of the wires on both jacks:

• Length of the BROWN wire is about 3 and 1/8 inches (to the bare end)
• Length of the GRAY is about 3 and 1/2 inches (to the bare end)
• Length of YELLOW wire is about 3 and 1/8 inches (to the bare end)

Length of Extra Wires (bare end to bare end):

• Brown: about 4 and 1/4 inches
• Yellow: about 5 and 1/4 inches
• Gray: about 5 and 3/8 inches
• Please let me know if you prefer different colored wires.

Please let me know if you prefer ONE INPUT jack and ONE OUTPUT jack - instead of the TWO INPUT jacks. I can edit the listing and / or you can state so in a message - and then I can provide you with info and pictures.

Also please let me know if you do NOT need the attached wires and / or the extra wires. And please let me know if you do not need the nuts and / or washers and / or the zip ties.

===

This listing is for a PAIR of BOSS INPUTS jacks (TWO individual OUTPUT jacks) + the brown, gray, yellow wires attached to them and the nuts & washers (as well as the three extra wires and two zip ties). But - on hand - available for sale upon request - I have a few more BOSS INPUT jacks - as well as - a few more BOSS OUTPUT jacks (in almost similar cosmetic condition) - but most don't have wires attached to them - but I have extra wires.

• Therefore - please message me if you would like to purchase more BOSS INPUT jacks and / or OUTPUT jacks - and let me know if you want it / them with or without the wires attached to them.

===

I took several pictures of the items for sale in this listing. Feel free to ask for more pictures.

There may be a few not too serious imperfections that I overlooked.   There may be some imperfections that can be seen in person that do not appear in the pictures.   And - there maybe some imperfections show up in the pictures that are not that visible in person (like glares and dust specks. 

+++

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA Shipping is with USPS Ground Advantage (with tracking). Please message if you want to save a few dollars on s/p and don't mind waiting a few days longer for the delivery - because upon request I can use USPS Media Mail.
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.